Uses of Class java.sql.SQLException (Java Platform SE 8 )

Packages that use SQLException
Package	Description
java.sql	Provides the API for accessing and processing data stored in a data source (usually a relational database) using the Java^TM programming language.
javax.sql	Provides the API for server side data source access and processing from the Java^TM programming language.
javax.sql.rowset	Standard interfaces and base classes for JDBC `RowSet` implementations.
javax.sql.rowset.serial	Provides utility classes to allow serializable mappings between SQL types and data types in the Java programming language.
javax.sql.rowset.spi	The standard classes and interfaces that a third party vendor has to use in its implementation of a synchronization provider.

Uses of SQLException in java.sql

Subclasses of SQLException in java.sql
Modifier and Type	Class and Description
`class`	`BatchUpdateException` The subclass of `SQLException` thrown when an error occurs during a batch update operation.
`class`	`DataTruncation` An exception thrown as a `DataTruncation` exception (on writes) or reported as a `DataTruncation` warning (on reads) when a data values is unexpectedly truncated for reasons other than its having exceeded `MaxFieldSize`.
`class`	`SQLClientInfoException` The subclass of `SQLException` is thrown when one or more client info properties could not be set on a `Connection`.
`class`	`SQLDataException` The subclass of `SQLException` thrown when the SQLState class value is '22', or under vendor-specified conditions.
`class`	`SQLFeatureNotSupportedException` The subclass of `SQLException` thrown when the SQLState class value is '0A' ( the value is 'zero' A).
`class`	`SQLIntegrityConstraintViolationException` The subclass of `SQLException` thrown when the SQLState class value is '23', or under vendor-specified conditions.
`class`	`SQLInvalidAuthorizationSpecException` The subclass of `SQLException` thrown when the SQLState class value is '28', or under vendor-specified conditions.
`class`	`SQLNonTransientConnectionException` The subclass of `SQLException` thrown for the SQLState class value '08', or under vendor-specified conditions.
`class`	`SQLNonTransientException` The subclass of `SQLException` thrown when an instance where a retry of the same operation would fail unless the cause of the `SQLException` is corrected.
`class`	`SQLRecoverableException` The subclass of `SQLException` thrown in situations where a previously failed operation might be able to succeed if the application performs some recovery steps and retries the entire transaction or in the case of a distributed transaction, the transaction branch.
`class`	`SQLSyntaxErrorException` The subclass of `SQLException` thrown when the SQLState class value is '42', or under vendor-specified conditions.
`class`	`SQLTimeoutException` The subclass of `SQLException` thrown when the timeout specified by `Statement.setQueryTimeout`, `DriverManager.setLoginTimeout`, `DataSource.setLoginTimeout`,`XADataSource.setLoginTimeout` has expired.
`class`	`SQLTransactionRollbackException` The subclass of `SQLException` thrown when the SQLState class value is '40', or under vendor-specified conditions.
`class`	`SQLTransientConnectionException` The subclass of `SQLException` for the SQLState class value '08', or under vendor-specified conditions.
`class`	`SQLTransientException` The subclass of `SQLException` is thrown in situations where a previously failed operation might be able to succeed when the operation is retried without any intervention by application-level functionality.
`class`	`SQLWarning` An exception that provides information on database access warnings.

Methods in java.sql that return SQLException
Modifier and Type	Method and Description
`SQLException`	SQLException.`getNextException()` Retrieves the exception chained to this `SQLException` object by setNextException(SQLException ex).

Methods in java.sql with parameters of type SQLException
Modifier and Type	Method and Description
`void`	SQLException.`setNextException(SQLException ex)` Adds an `SQLException` object to the end of the chain.

Methods in java.sql that throw SQLException
Modifier and Type	Method and Description
`void`	Connection.`abort(Executor executor)` Terminates an open connection.
`boolean`	ResultSet.`absolute(int row)` Moves the cursor to the given row number in this `ResultSet` object.
`boolean`	Driver.`acceptsURL(String url)` Retrieves whether the driver thinks that it can open a connection to the given URL.
`void`	PreparedStatement.`addBatch()` Adds a set of parameters to this `PreparedStatement` object's batch of commands.
`void`	Statement.`addBatch(String sql)` Adds the given SQL command to the current list of commands for this `Statement` object.
`void`	ResultSet.`afterLast()` Moves the cursor to the end of this `ResultSet` object, just after the last row.
`boolean`	DatabaseMetaData.`allProceduresAreCallable()` Retrieves whether the current user can call all the procedures returned by the method `getProcedures`.
`boolean`	DatabaseMetaData.`allTablesAreSelectable()` Retrieves whether the current user can use all the tables returned by the method `getTables` in a `SELECT` statement.
`boolean`	DatabaseMetaData.`autoCommitFailureClosesAllResultSets()` Retrieves whether a `SQLException` while autoCommit is `true` indicates that all open ResultSets are closed, even ones that are holdable.
`void`	ResultSet.`beforeFirst()` Moves the cursor to the front of this `ResultSet` object, just before the first row.
`void`	Statement.`cancel()` Cancels this `Statement` object if both the DBMS and driver support aborting an SQL statement.
`void`	ResultSet.`cancelRowUpdates()` Cancels the updates made to the current row in this `ResultSet` object.
`void`	Statement.`clearBatch()` Empties this `Statement` object's current list of SQL commands.
`void`	PreparedStatement.`clearParameters()` Clears the current parameter values immediately.
`void`	Statement.`clearWarnings()` Clears all the warnings reported on this `Statement` object.
`void`	ResultSet.`clearWarnings()` Clears all warnings reported on this `ResultSet` object.
`void`	Connection.`clearWarnings()` Clears all warnings reported for this `Connection` object.
`void`	Statement.`close()` Releases this `Statement` object's database and JDBC resources immediately instead of waiting for this to happen when it is automatically closed.
`void`	ResultSet.`close()` Releases this `ResultSet` object's database and JDBC resources immediately instead of waiting for this to happen when it is automatically closed.
`void`	Connection.`close()` Releases this `Connection` object's database and JDBC resources immediately instead of waiting for them to be automatically released.
`void`	Statement.`closeOnCompletion()` Specifies that this `Statement` will be closed when all its dependent result sets are closed.
`void`	Connection.`commit()` Makes all changes made since the previous commit/rollback permanent and releases any database locks currently held by this `Connection` object.
`Connection`	Driver.`connect(String url, Properties info)` Attempts to make a database connection to the given URL.
`Array`	Connection.`createArrayOf(String typeName, Object[] elements)` Factory method for creating Array objects.
`Blob`	Connection.`createBlob()` Constructs an object that implements the `Blob` interface.
`Clob`	Connection.`createClob()` Constructs an object that implements the `Clob` interface.
`NClob`	Connection.`createNClob()` Constructs an object that implements the `NClob` interface.
`SQLXML`	Connection.`createSQLXML()` Constructs an object that implements the `SQLXML` interface.
`Statement`	Connection.`createStatement()` Creates a `Statement` object for sending SQL statements to the database.
`Statement`	Connection.`createStatement(int resultSetType, int resultSetConcurrency)` Creates a `Statement` object that will generate `ResultSet` objects with the given type and concurrency.
`Statement`	Connection.`createStatement(int resultSetType, int resultSetConcurrency, int resultSetHoldability)` Creates a `Statement` object that will generate `ResultSet` objects with the given type, concurrency, and holdability.
`Struct`	Connection.`createStruct(String typeName, Object[] attributes)` Factory method for creating Struct objects.
`boolean`	DatabaseMetaData.`dataDefinitionCausesTransactionCommit()` Retrieves whether a data definition statement within a transaction forces the transaction to commit.
`boolean`	DatabaseMetaData.`dataDefinitionIgnoredInTransactions()` Retrieves whether this database ignores a data definition statement within a transaction.
`void`	ResultSet.`deleteRow()` Deletes the current row from this `ResultSet` object and from the underlying database.
`boolean`	DatabaseMetaData.`deletesAreDetected(int type)` Retrieves whether or not a visible row delete can be detected by calling the method `ResultSet.rowDeleted`.
`static void`	DriverManager.`deregisterDriver(Driver driver)` Removes the specified driver from the `DriverManager`'s list of registered drivers.
`boolean`	DatabaseMetaData.`doesMaxRowSizeIncludeBlobs()` Retrieves whether the return value for the method `getMaxRowSize` includes the SQL data types `LONGVARCHAR` and `LONGVARBINARY`.
`boolean`	PreparedStatement.`execute()` Executes the SQL statement in this `PreparedStatement` object, which may be any kind of SQL statement.
`boolean`	Statement.`execute(String sql)` Executes the given SQL statement, which may return multiple results.
`boolean`	Statement.`execute(String sql, int autoGeneratedKeys)` Executes the given SQL statement, which may return multiple results, and signals the driver that any auto-generated keys should be made available for retrieval.
`boolean`	Statement.`execute(String sql, int[] columnIndexes)` Executes the given SQL statement, which may return multiple results, and signals the driver that the auto-generated keys indicated in the given array should be made available for retrieval.
`boolean`	Statement.`execute(String sql, String[] columnNames)` Executes the given SQL statement, which may return multiple results, and signals the driver that the auto-generated keys indicated in the given array should be made available for retrieval.
`int[]`	Statement.`executeBatch()` Submits a batch of commands to the database for execution and if all commands execute successfully, returns an array of update counts.
`default long[]`	Statement.`executeLargeBatch()` Submits a batch of commands to the database for execution and if all commands execute successfully, returns an array of update counts.
`default long`	PreparedStatement.`executeLargeUpdate()` Executes the SQL statement in this `PreparedStatement` object, which must be an SQL Data Manipulation Language (DML) statement, such as `INSERT`, `UPDATE` or `DELETE`; or an SQL statement that returns nothing, such as a DDL statement.
`default long`	Statement.`executeLargeUpdate(String sql)` Executes the given SQL statement, which may be an `INSERT`, `UPDATE`, or `DELETE` statement or an SQL statement that returns nothing, such as an SQL DDL statement.
`default long`	Statement.`executeLargeUpdate(String sql, int autoGeneratedKeys)` Executes the given SQL statement and signals the driver with the given flag about whether the auto-generated keys produced by this `Statement` object should be made available for retrieval.
`default long`	Statement.`executeLargeUpdate(String sql, int[] columnIndexes)` Executes the given SQL statement and signals the driver that the auto-generated keys indicated in the given array should be made available for retrieval.
`default long`	Statement.`executeLargeUpdate(String sql, String[] columnNames)` Executes the given SQL statement and signals the driver that the auto-generated keys indicated in the given array should be made available for retrieval.
`ResultSet`	PreparedStatement.`executeQuery()` Executes the SQL query in this `PreparedStatement` object and returns the `ResultSet` object generated by the query.
`ResultSet`	Statement.`executeQuery(String sql)` Executes the given SQL statement, which returns a single `ResultSet` object.
`int`	PreparedStatement.`executeUpdate()` Executes the SQL statement in this `PreparedStatement` object, which must be an SQL Data Manipulation Language (DML) statement, such as `INSERT`, `UPDATE` or `DELETE`; or an SQL statement that returns nothing, such as a DDL statement.
`int`	Statement.`executeUpdate(String sql)` Executes the given SQL statement, which may be an `INSERT`, `UPDATE`, or `DELETE` statement or an SQL statement that returns nothing, such as an SQL DDL statement.
`int`	Statement.`executeUpdate(String sql, int autoGeneratedKeys)` Executes the given SQL statement and signals the driver with the given flag about whether the auto-generated keys produced by this `Statement` object should be made available for retrieval.
`int`	Statement.`executeUpdate(String sql, int[] columnIndexes)` Executes the given SQL statement and signals the driver that the auto-generated keys indicated in the given array should be made available for retrieval.
`int`	Statement.`executeUpdate(String sql, String[] columnNames)` Executes the given SQL statement and signals the driver that the auto-generated keys indicated in the given array should be made available for retrieval.
`int`	ResultSet.`findColumn(String columnLabel)` Maps the given `ResultSet` column label to its `ResultSet` column index.
`boolean`	ResultSet.`first()` Moves the cursor to the first row in this `ResultSet` object.
`void`	Array.`free()` This method frees the `Array` object and releases the resources that it holds.
`void`	Clob.`free()` This method frees the `Clob` object and releases the resources the resources that it holds.
`void`	SQLXML.`free()` This method closes this object and releases the resources that it held.
`void`	Blob.`free()` This method frees the `Blob` object and releases the resources that it holds.
`boolean`	DatabaseMetaData.`generatedKeyAlwaysReturned()` Retrieves whether a generated key will always be returned if the column name(s) or index(es) specified for the auto generated key column(s) are valid and the statement succeeds.
`Object`	Array.`getArray()` Retrieves the contents of the SQL `ARRAY` value designated by this `Array` object in the form of an array in the Java programming language.
`Array`	CallableStatement.`getArray(int parameterIndex)` Retrieves the value of the designated JDBC `ARRAY` parameter as an `Array` object in the Java programming language.
`Array`	ResultSet.`getArray(int columnIndex)` Retrieves the value of the designated column in the current row of this `ResultSet` object as an `Array` object in the Java programming language.
`Object`	Array.`getArray(long index, int count)` Retrieves a slice of the SQL `ARRAY` value designated by this `Array` object, beginning with the specified `index` and containing up to `count` successive elements of the SQL array.
`Object`	Array.`getArray(long index, int count, Map<String,Class<?>> map)` Retreives a slice of the SQL `ARRAY` value designated by this `Array` object, beginning with the specified `index` and containing up to `count` successive elements of the SQL array.
`Object`	Array.`getArray(Map<String,Class<?>> map)` Retrieves the contents of the SQL `ARRAY` value designated by this `Array` object.
`Array`	CallableStatement.`getArray(String parameterName)` Retrieves the value of a JDBC `ARRAY` parameter as an `Array` object in the Java programming language.
`Array`	ResultSet.`getArray(String columnLabel)` Retrieves the value of the designated column in the current row of this `ResultSet` object as an `Array` object in the Java programming language.
`InputStream`	Clob.`getAsciiStream()` Retrieves the `CLOB` value designated by this `Clob` object as an ascii stream.
`InputStream`	ResultSet.`getAsciiStream(int columnIndex)` Retrieves the value of the designated column in the current row of this `ResultSet` object as a stream of ASCII characters.
`InputStream`	ResultSet.`getAsciiStream(String columnLabel)` Retrieves the value of the designated column in the current row of this `ResultSet` object as a stream of ASCII characters.
`Object[]`	Struct.`getAttributes()` Produces the ordered values of the attributes of the SQL structured type that this `Struct` object represents.
`Object[]`	Struct.`getAttributes(Map<String,Class<?>> map)` Produces the ordered values of the attributes of the SQL structured type that this `Struct` object represents.
`ResultSet`	DatabaseMetaData.`getAttributes(String catalog, String schemaPattern, String typeNamePattern, String attributeNamePattern)` Retrieves a description of the given attribute of the given type for a user-defined type (UDT) that is available in the given schema and catalog.
`boolean`	Connection.`getAutoCommit()` Retrieves the current auto-commit mode for this `Connection` object.
`int`	Array.`getBaseType()` Retrieves the JDBC type of the elements in the array designated by this `Array` object.
`String`	Array.`getBaseTypeName()` Retrieves the SQL type name of the elements in the array designated by this `Array` object.
`String`	Ref.`getBaseTypeName()` Retrieves the fully-qualified SQL name of the SQL structured type that this `Ref` object references.
`ResultSet`	DatabaseMetaData.`getBestRowIdentifier(String catalog, String schema, String table, int scope, boolean nullable)` Retrieves a description of a table's optimal set of columns that uniquely identifies a row.
`BigDecimal`	CallableStatement.`getBigDecimal(int parameterIndex)` Retrieves the value of the designated JDBC `NUMERIC` parameter as a `java.math.BigDecimal` object with as many digits to the right of the decimal point as the value contains.
`BigDecimal`	ResultSet.`getBigDecimal(int columnIndex)` Retrieves the value of the designated column in the current row of this `ResultSet` object as a `java.math.BigDecimal` with full precision.
`BigDecimal`	CallableStatement.`getBigDecimal(int parameterIndex, int scale)` Deprecated. use `getBigDecimal(int parameterIndex)` or `getBigDecimal(String parameterName)`
`BigDecimal`	ResultSet.`getBigDecimal(int columnIndex, int scale)` Deprecated. Use `getBigDecimal(int columnIndex)` or `getBigDecimal(String columnLabel)`
`BigDecimal`	CallableStatement.`getBigDecimal(String parameterName)` Retrieves the value of a JDBC `NUMERIC` parameter as a `java.math.BigDecimal` object with as many digits to the right of the decimal point as the value contains.
`BigDecimal`	ResultSet.`getBigDecimal(String columnLabel)` Retrieves the value of the designated column in the current row of this `ResultSet` object as a `java.math.BigDecimal` with full precision.
`BigDecimal`	ResultSet.`getBigDecimal(String columnLabel, int scale)` Deprecated. Use `getBigDecimal(int columnIndex)` or `getBigDecimal(String columnLabel)`
`InputStream`	SQLXML.`getBinaryStream()` Retrieves the XML value designated by this SQLXML instance as a stream.
`InputStream`	Blob.`getBinaryStream()` Retrieves the `BLOB` value designated by this `Blob` instance as a stream.
`InputStream`	ResultSet.`getBinaryStream(int columnIndex)` Retrieves the value of the designated column in the current row of this `ResultSet` object as a stream of uninterpreted bytes.
`InputStream`	Blob.`getBinaryStream(long pos, long length)` Returns an `InputStream` object that contains a partial `Blob` value, starting with the byte specified by pos, which is length bytes in length.
`InputStream`	ResultSet.`getBinaryStream(String columnLabel)` Retrieves the value of the designated column in the current row of this `ResultSet` object as a stream of uninterpreted `byte`s.
`Blob`	CallableStatement.`getBlob(int parameterIndex)` Retrieves the value of the designated JDBC `BLOB` parameter as a `Blob` object in the Java programming language.
`Blob`	ResultSet.`getBlob(int columnIndex)` Retrieves the value of the designated column in the current row of this `ResultSet` object as a `Blob` object in the Java programming language.
`Blob`	CallableStatement.`getBlob(String parameterName)` Retrieves the value of a JDBC `BLOB` parameter as a `Blob` object in the Java programming language.
`Blob`	ResultSet.`getBlob(String columnLabel)` Retrieves the value of the designated column in the current row of this `ResultSet` object as a `Blob` object in the Java programming language.
`boolean`	CallableStatement.`getBoolean(int parameterIndex)` Retrieves the value of the designated JDBC `BIT` or `BOOLEAN` parameter as a `boolean` in the Java programming language.
`boolean`	ResultSet.`getBoolean(int columnIndex)` Retrieves the value of the designated column in the current row of this `ResultSet` object as a `boolean` in the Java programming language.
`boolean`	CallableStatement.`getBoolean(String parameterName)` Retrieves the value of a JDBC `BIT` or `BOOLEAN` parameter as a `boolean` in the Java programming language.
`boolean`	ResultSet.`getBoolean(String columnLabel)` Retrieves the value of the designated column in the current row of this `ResultSet` object as a `boolean` in the Java programming language.
`byte`	CallableStatement.`getByte(int parameterIndex)` Retrieves the value of the designated JDBC `TINYINT` parameter as a `byte` in the Java programming language.
`byte`	ResultSet.`getByte(int columnIndex)` Retrieves the value of the designated column in the current row of this `ResultSet` object as a `byte` in the Java programming language.
`byte`	CallableStatement.`getByte(String parameterName)` Retrieves the value of a JDBC `TINYINT` parameter as a `byte` in the Java programming language.
`byte`	ResultSet.`getByte(String columnLabel)` Retrieves the value of the designated column in the current row of this `ResultSet` object as a `byte` in the Java programming language.
`byte[]`	CallableStatement.`getBytes(int parameterIndex)` Retrieves the value of the designated JDBC `BINARY` or `VARBINARY` parameter as an array of `byte` values in the Java programming language.
`byte[]`	ResultSet.`getBytes(int columnIndex)` Retrieves the value of the designated column in the current row of this `ResultSet` object as a `byte` array in the Java programming language.
`byte[]`	Blob.`getBytes(long pos, int length)` Retrieves all or part of the `BLOB` value that this `Blob` object represents, as an array of bytes.
`byte[]`	CallableStatement.`getBytes(String parameterName)` Retrieves the value of a JDBC `BINARY` or `VARBINARY` parameter as an array of `byte` values in the Java programming language.
`byte[]`	ResultSet.`getBytes(String columnLabel)` Retrieves the value of the designated column in the current row of this `ResultSet` object as a `byte` array in the Java programming language.
`String`	Connection.`getCatalog()` Retrieves this `Connection` object's current catalog name.
`String`	ResultSetMetaData.`getCatalogName(int column)` Gets the designated column's table's catalog name.
`ResultSet`	DatabaseMetaData.`getCatalogs()` Retrieves the catalog names available in this database.
`String`	DatabaseMetaData.`getCatalogSeparator()` Retrieves the `String` that this database uses as the separator between a catalog and table name.
`String`	DatabaseMetaData.`getCatalogTerm()` Retrieves the database vendor's preferred term for "catalog".
`Reader`	Clob.`getCharacterStream()` Retrieves the `CLOB` value designated by this `Clob` object as a `java.io.Reader` object (or as a stream of characters).
`Reader`	SQLXML.`getCharacterStream()` Retrieves the XML value designated by this SQLXML instance as a java.io.Reader object.
`Reader`	CallableStatement.`getCharacterStream(int parameterIndex)` Retrieves the value of the designated parameter as a `java.io.Reader` object in the Java programming language.
`Reader`	ResultSet.`getCharacterStream(int columnIndex)` Retrieves the value of the designated column in the current row of this `ResultSet` object as a `java.io.Reader` object.
`Reader`	Clob.`getCharacterStream(long pos, long length)` Returns a `Reader` object that contains a partial `Clob` value, starting with the character specified by pos, which is length characters in length.
`Reader`	CallableStatement.`getCharacterStream(String parameterName)` Retrieves the value of the designated parameter as a `java.io.Reader` object in the Java programming language.
`Reader`	ResultSet.`getCharacterStream(String columnLabel)` Retrieves the value of the designated column in the current row of this `ResultSet` object as a `java.io.Reader` object.
`Properties`	Connection.`getClientInfo()` Returns a list containing the name and current value of each client info property supported by the driver.
`String`	Connection.`getClientInfo(String name)` Returns the value of the client info property specified by name.
`ResultSet`	DatabaseMetaData.`getClientInfoProperties()` Retrieves a list of the client info properties that the driver supports.
`Clob`	CallableStatement.`getClob(int parameterIndex)` Retrieves the value of the designated JDBC `CLOB` parameter as a `java.sql.Clob` object in the Java programming language.
`Clob`	ResultSet.`getClob(int columnIndex)` Retrieves the value of the designated column in the current row of this `ResultSet` object as a `Clob` object in the Java programming language.
`Clob`	CallableStatement.`getClob(String parameterName)` Retrieves the value of a JDBC `CLOB` parameter as a `java.sql.Clob` object in the Java programming language.
`Clob`	ResultSet.`getClob(String columnLabel)` Retrieves the value of the designated column in the current row of this `ResultSet` object as a `Clob` object in the Java programming language.
`String`	ResultSetMetaData.`getColumnClassName(int column)` Returns the fully-qualified name of the Java class whose instances are manufactured if the method `ResultSet.getObject` is called to retrieve a value from the column.
`int`	ResultSetMetaData.`getColumnCount()` Returns the number of columns in this `ResultSet` object.
`int`	ResultSetMetaData.`getColumnDisplaySize(int column)` Indicates the designated column's normal maximum width in characters.
`String`	ResultSetMetaData.`getColumnLabel(int column)` Gets the designated column's suggested title for use in printouts and displays.
`String`	ResultSetMetaData.`getColumnName(int column)` Get the designated column's name.
`ResultSet`	DatabaseMetaData.`getColumnPrivileges(String catalog, String schema, String table, String columnNamePattern)` Retrieves a description of the access rights for a table's columns.
`ResultSet`	DatabaseMetaData.`getColumns(String catalog, String schemaPattern, String tableNamePattern, String columnNamePattern)` Retrieves a description of table columns available in the specified catalog.
`int`	ResultSetMetaData.`getColumnType(int column)` Retrieves the designated column's SQL type.
`String`	ResultSetMetaData.`getColumnTypeName(int column)` Retrieves the designated column's database-specific type name.
`int`	ResultSet.`getConcurrency()` Retrieves the concurrency mode of this `ResultSet` object.
`Connection`	Statement.`getConnection()` Retrieves the `Connection` object that produced this `Statement` object.
`Connection`	DatabaseMetaData.`getConnection()` Retrieves the connection that produced this metadata object.
`static Connection`	DriverManager.`getConnection(String url)` Attempts to establish a connection to the given database URL.
`static Connection`	DriverManager.`getConnection(String url, Properties info)` Attempts to establish a connection to the given database URL.
`static Connection`	DriverManager.`getConnection(String url, String user, String password)` Attempts to establish a connection to the given database URL.
`ResultSet`	DatabaseMetaData.`getCrossReference(String parentCatalog, String parentSchema, String parentTable, String foreignCatalog, String foreignSchema, String foreignTable)` Retrieves a description of the foreign key columns in the given foreign key table that reference the primary key or the columns representing a unique constraint of the parent table (could be the same or a different table).
`String`	ResultSet.`getCursorName()` Retrieves the name of the SQL cursor used by this `ResultSet` object.
`int`	DatabaseMetaData.`getDatabaseMajorVersion()` Retrieves the major version number of the underlying database.
`int`	DatabaseMetaData.`getDatabaseMinorVersion()` Retrieves the minor version number of the underlying database.
`String`	DatabaseMetaData.`getDatabaseProductName()` Retrieves the name of this database product.
`String`	DatabaseMetaData.`getDatabaseProductVersion()` Retrieves the version number of this database product.
`Date`	CallableStatement.`getDate(int parameterIndex)` Retrieves the value of the designated JDBC `DATE` parameter as a `java.sql.Date` object.
`Date`	ResultSet.`getDate(int columnIndex)` Retrieves the value of the designated column in the current row of this `ResultSet` object as a `java.sql.Date` object in the Java programming language.
`Date`	CallableStatement.`getDate(int parameterIndex, Calendar cal)` Retrieves the value of the designated JDBC `DATE` parameter as a `java.sql.Date` object, using the given `Calendar` object to construct the date.
`Date`	ResultSet.`getDate(int columnIndex, Calendar cal)` Retrieves the value of the designated column in the current row of this `ResultSet` object as a `java.sql.Date` object in the Java programming language.
`Date`	CallableStatement.`getDate(String parameterName)` Retrieves the value of a JDBC `DATE` parameter as a `java.sql.Date` object.
`Date`	ResultSet.`getDate(String columnLabel)` Retrieves the value of the designated column in the current row of this `ResultSet` object as a `java.sql.Date` object in the Java programming language.
`Date`	CallableStatement.`getDate(String parameterName, Calendar cal)` Retrieves the value of a JDBC `DATE` parameter as a `java.sql.Date` object, using the given `Calendar` object to construct the date.
`Date`	ResultSet.`getDate(String columnLabel, Calendar cal)` Retrieves the value of the designated column in the current row of this `ResultSet` object as a `java.sql.Date` object in the Java programming language.
`int`	DatabaseMetaData.`getDefaultTransactionIsolation()` Retrieves this database's default transaction isolation level.
`double`	CallableStatement.`getDouble(int parameterIndex)` Retrieves the value of the designated JDBC `DOUBLE` parameter as a `double` in the Java programming language.
`double`	ResultSet.`getDouble(int columnIndex)` Retrieves the value of the designated column in the current row of this `ResultSet` object as a `double` in the Java programming language.
`double`	CallableStatement.`getDouble(String parameterName)` Retrieves the value of a JDBC `DOUBLE` parameter as a `double` in the Java programming language.
`double`	ResultSet.`getDouble(String columnLabel)` Retrieves the value of the designated column in the current row of this `ResultSet` object as a `double` in the Java programming language.
`static Driver`	DriverManager.`getDriver(String url)` Attempts to locate a driver that understands the given URL.
`String`	DatabaseMetaData.`getDriverName()` Retrieves the name of this JDBC driver.
`String`	DatabaseMetaData.`getDriverVersion()` Retrieves the version number of this JDBC driver as a `String`.
`ResultSet`	DatabaseMetaData.`getExportedKeys(String catalog, String schema, String table)` Retrieves a description of the foreign key columns that reference the given table's primary key columns (the foreign keys exported by a table).
`String`	DatabaseMetaData.`getExtraNameCharacters()` Retrieves all the "extra" characters that can be used in unquoted identifier names (those beyond a-z, A-Z, 0-9 and _).
`int`	Statement.`getFetchDirection()` Retrieves the direction for fetching rows from database tables that is the default for result sets generated from this `Statement` object.
`int`	ResultSet.`getFetchDirection()` Retrieves the fetch direction for this `ResultSet` object.
`int`	Statement.`getFetchSize()` Retrieves the number of result set rows that is the default fetch size for `ResultSet` objects generated from this `Statement` object.
`int`	ResultSet.`getFetchSize()` Retrieves the fetch size for this `ResultSet` object.
`float`	CallableStatement.`getFloat(int parameterIndex)` Retrieves the value of the designated JDBC `FLOAT` parameter as a `float` in the Java programming language.
`float`	ResultSet.`getFloat(int columnIndex)` Retrieves the value of the designated column in the current row of this `ResultSet` object as a `float` in the Java programming language.
`float`	CallableStatement.`getFloat(String parameterName)` Retrieves the value of a JDBC `FLOAT` parameter as a `float` in the Java programming language.
`float`	ResultSet.`getFloat(String columnLabel)` Retrieves the value of the designated column in the current row of this `ResultSet` object as a `float` in the Java programming language.
`ResultSet`	DatabaseMetaData.`getFunctionColumns(String catalog, String schemaPattern, String functionNamePattern, String columnNamePattern)` Retrieves a description of the given catalog's system or user function parameters and return type.
`ResultSet`	DatabaseMetaData.`getFunctions(String catalog, String schemaPattern, String functionNamePattern)` Retrieves a description of the system and user functions available in the given catalog.
`ResultSet`	Statement.`getGeneratedKeys()` Retrieves any auto-generated keys created as a result of executing this `Statement` object.
`int`	ResultSet.`getHoldability()` Retrieves the holdability of this `ResultSet` object
`int`	Connection.`getHoldability()` Retrieves the current holdability of `ResultSet` objects created using this `Connection` object.
`String`	DatabaseMetaData.`getIdentifierQuoteString()` Retrieves the string used to quote SQL identifiers.
`ResultSet`	DatabaseMetaData.`getImportedKeys(String catalog, String schema, String table)` Retrieves a description of the primary key columns that are referenced by the given table's foreign key columns (the primary keys imported by a table).
`ResultSet`	DatabaseMetaData.`getIndexInfo(String catalog, String schema, String table, boolean unique, boolean approximate)` Retrieves a description of the given table's indices and statistics.
`int`	CallableStatement.`getInt(int parameterIndex)` Retrieves the value of the designated JDBC `INTEGER` parameter as an `int` in the Java programming language.
`int`	ResultSet.`getInt(int columnIndex)` Retrieves the value of the designated column in the current row of this `ResultSet` object as an `int` in the Java programming language.
`int`	CallableStatement.`getInt(String parameterName)` Retrieves the value of a JDBC `INTEGER` parameter as an `int` in the Java programming language.
`int`	ResultSet.`getInt(String columnLabel)` Retrieves the value of the designated column in the current row of this `ResultSet` object as an `int` in the Java programming language.
`int`	DatabaseMetaData.`getJDBCMajorVersion()` Retrieves the major JDBC version number for this driver.
`int`	DatabaseMetaData.`getJDBCMinorVersion()` Retrieves the minor JDBC version number for this driver.
`default long`	Statement.`getLargeMaxRows()` Retrieves the maximum number of rows that a `ResultSet` object produced by this `Statement` object can contain.
`default long`	Statement.`getLargeUpdateCount()` Retrieves the current result as an update count; if the result is a `ResultSet` object or there are no more results, -1 is returned.
`long`	CallableStatement.`getLong(int parameterIndex)` Retrieves the value of the designated JDBC `BIGINT` parameter as a `long` in the Java programming language.
`long`	ResultSet.`getLong(int columnIndex)` Retrieves the value of the designated column in the current row of this `ResultSet` object as a `long` in the Java programming language.
`long`	CallableStatement.`getLong(String parameterName)` Retrieves the value of a JDBC `BIGINT` parameter as a `long` in the Java programming language.
`long`	ResultSet.`getLong(String columnLabel)` Retrieves the value of the designated column in the current row of this `ResultSet` object as a `long` in the Java programming language.
`int`	DatabaseMetaData.`getMaxBinaryLiteralLength()` Retrieves the maximum number of hex characters this database allows in an inline binary literal.
`int`	DatabaseMetaData.`getMaxCatalogNameLength()` Retrieves the maximum number of characters that this database allows in a catalog name.
`int`	DatabaseMetaData.`getMaxCharLiteralLength()` Retrieves the maximum number of characters this database allows for a character literal.
`int`	DatabaseMetaData.`getMaxColumnNameLength()` Retrieves the maximum number of characters this database allows for a column name.
`int`	DatabaseMetaData.`getMaxColumnsInGroupBy()` Retrieves the maximum number of columns this database allows in a `GROUP BY` clause.
`int`	DatabaseMetaData.`getMaxColumnsInIndex()` Retrieves the maximum number of columns this database allows in an index.
`int`	DatabaseMetaData.`getMaxColumnsInOrderBy()` Retrieves the maximum number of columns this database allows in an `ORDER BY` clause.
`int`	DatabaseMetaData.`getMaxColumnsInSelect()` Retrieves the maximum number of columns this database allows in a `SELECT` list.
`int`	DatabaseMetaData.`getMaxColumnsInTable()` Retrieves the maximum number of columns this database allows in a table.
`int`	DatabaseMetaData.`getMaxConnections()` Retrieves the maximum number of concurrent connections to this database that are possible.
`int`	DatabaseMetaData.`getMaxCursorNameLength()` Retrieves the maximum number of characters that this database allows in a cursor name.
`int`	Statement.`getMaxFieldSize()` Retrieves the maximum number of bytes that can be returned for character and binary column values in a `ResultSet` object produced by this `Statement` object.
`int`	DatabaseMetaData.`getMaxIndexLength()` Retrieves the maximum number of bytes this database allows for an index, including all of the parts of the index.
`default long`	DatabaseMetaData.`getMaxLogicalLobSize()` Retrieves the maximum number of bytes this database allows for the logical size for a `LOB`.
`int`	DatabaseMetaData.`getMaxProcedureNameLength()` Retrieves the maximum number of characters that this database allows in a procedure name.
`int`	Statement.`getMaxRows()` Retrieves the maximum number of rows that a `ResultSet` object produced by this `Statement` object can contain.
`int`	DatabaseMetaData.`getMaxRowSize()` Retrieves the maximum number of bytes this database allows in a single row.
`int`	DatabaseMetaData.`getMaxSchemaNameLength()` Retrieves the maximum number of characters that this database allows in a schema name.
`int`	DatabaseMetaData.`getMaxStatementLength()` Retrieves the maximum number of characters this database allows in an SQL statement.
`int`	DatabaseMetaData.`getMaxStatements()` Retrieves the maximum number of active statements to this database that can be open at the same time.
`int`	DatabaseMetaData.`getMaxTableNameLength()` Retrieves the maximum number of characters this database allows in a table name.
`int`	DatabaseMetaData.`getMaxTablesInSelect()` Retrieves the maximum number of tables this database allows in a `SELECT` statement.
`int`	DatabaseMetaData.`getMaxUserNameLength()` Retrieves the maximum number of characters this database allows in a user name.
`ResultSetMetaData`	PreparedStatement.`getMetaData()` Retrieves a `ResultSetMetaData` object that contains information about the columns of the `ResultSet` object that will be returned when this `PreparedStatement` object is executed.
`ResultSetMetaData`	ResultSet.`getMetaData()` Retrieves the number, types and properties of this `ResultSet` object's columns.
`DatabaseMetaData`	Connection.`getMetaData()` Retrieves a `DatabaseMetaData` object that contains metadata about the database to which this `Connection` object represents a connection.
`boolean`	Statement.`getMoreResults()` Moves to this `Statement` object's next result, returns `true` if it is a `ResultSet` object, and implicitly closes any current `ResultSet` object(s) obtained with the method `getResultSet`.
`boolean`	Statement.`getMoreResults(int current)` Moves to this `Statement` object's next result, deals with any current `ResultSet` object(s) according to the instructions specified by the given flag, and returns `true` if the next result is a `ResultSet` object.
`Reader`	CallableStatement.`getNCharacterStream(int parameterIndex)` Retrieves the value of the designated parameter as a `java.io.Reader` object in the Java programming language.
`Reader`	ResultSet.`getNCharacterStream(int columnIndex)` Retrieves the value of the designated column in the current row of this `ResultSet` object as a `java.io.Reader` object.
`Reader`	CallableStatement.`getNCharacterStream(String parameterName)` Retrieves the value of the designated parameter as a `java.io.Reader` object in the Java programming language.
`Reader`	ResultSet.`getNCharacterStream(String columnLabel)` Retrieves the value of the designated column in the current row of this `ResultSet` object as a `java.io.Reader` object.
`NClob`	CallableStatement.`getNClob(int parameterIndex)` Retrieves the value of the designated JDBC `NCLOB` parameter as a `java.sql.NClob` object in the Java programming language.
`NClob`	ResultSet.`getNClob(int columnIndex)` Retrieves the value of the designated column in the current row of this `ResultSet` object as a `NClob` object in the Java programming language.
`NClob`	CallableStatement.`getNClob(String parameterName)` Retrieves the value of a JDBC `NCLOB` parameter as a `java.sql.NClob` object in the Java programming language.
`NClob`	ResultSet.`getNClob(String columnLabel)` Retrieves the value of the designated column in the current row of this `ResultSet` object as a `NClob` object in the Java programming language.
`int`	Connection.`getNetworkTimeout()` Retrieves the number of milliseconds the driver will wait for a database request to complete.
`String`	CallableStatement.`getNString(int parameterIndex)` Retrieves the value of the designated `NCHAR`, `NVARCHAR` or `LONGNVARCHAR` parameter as a `String` in the Java programming language.
`String`	ResultSet.`getNString(int columnIndex)` Retrieves the value of the designated column in the current row of this `ResultSet` object as a `String` in the Java programming language.
`String`	CallableStatement.`getNString(String parameterName)` Retrieves the value of the designated `NCHAR`, `NVARCHAR` or `LONGNVARCHAR` parameter as a `String` in the Java programming language.
`String`	ResultSet.`getNString(String columnLabel)` Retrieves the value of the designated column in the current row of this `ResultSet` object as a `String` in the Java programming language.
`String`	DatabaseMetaData.`getNumericFunctions()` Retrieves a comma-separated list of math functions available with this database.
`Object`	Ref.`getObject()` Retrieves the SQL structured type instance referenced by this `Ref` object.
`Object`	CallableStatement.`getObject(int parameterIndex)` Retrieves the value of the designated parameter as an `Object` in the Java programming language.
`Object`	ResultSet.`getObject(int columnIndex)` Gets the value of the designated column in the current row of this `ResultSet` object as an `Object` in the Java programming language.
`<T> T`	CallableStatement.`getObject(int parameterIndex, Class<T> type)` Returns an object representing the value of OUT parameter `parameterIndex` and will convert from the SQL type of the parameter to the requested Java data type, if the conversion is supported.
`<T> T`	ResultSet.`getObject(int columnIndex, Class<T> type)` Retrieves the value of the designated column in the current row of this `ResultSet` object and will convert from the SQL type of the column to the requested Java data type, if the conversion is supported.
`Object`	CallableStatement.`getObject(int parameterIndex, Map<String,Class<?>> map)` Returns an object representing the value of OUT parameter `parameterIndex` and uses `map` for the custom mapping of the parameter value.
`Object`	ResultSet.`getObject(int columnIndex, Map<String,Class<?>> map)` Retrieves the value of the designated column in the current row of this `ResultSet` object as an `Object` in the Java programming language.
`Object`	Ref.`getObject(Map<String,Class<?>> map)` Retrieves the referenced object and maps it to a Java type using the given type map.
`Object`	CallableStatement.`getObject(String parameterName)` Retrieves the value of a parameter as an `Object` in the Java programming language.
`Object`	ResultSet.`getObject(String columnLabel)` Gets the value of the designated column in the current row of this `ResultSet` object as an `Object` in the Java programming language.
`<T> T`	CallableStatement.`getObject(String parameterName, Class<T> type)` Returns an object representing the value of OUT parameter `parameterName` and will convert from the SQL type of the parameter to the requested Java data type, if the conversion is supported.
`<T> T`	ResultSet.`getObject(String columnLabel, Class<T> type)` Retrieves the value of the designated column in the current row of this `ResultSet` object and will convert from the SQL type of the column to the requested Java data type, if the conversion is supported.
`Object`	CallableStatement.`getObject(String parameterName, Map<String,Class<?>> map)` Returns an object representing the value of OUT parameter `parameterName` and uses `map` for the custom mapping of the parameter value.
`Object`	ResultSet.`getObject(String columnLabel, Map<String,Class<?>> map)` Retrieves the value of the designated column in the current row of this `ResultSet` object as an `Object` in the Java programming language.
`String`	ParameterMetaData.`getParameterClassName(int param)` Retrieves the fully-qualified name of the Java class whose instances should be passed to the method `PreparedStatement.setObject`.
`int`	ParameterMetaData.`getParameterCount()` Retrieves the number of parameters in the `PreparedStatement` object for which this `ParameterMetaData` object contains information.
`ParameterMetaData`	PreparedStatement.`getParameterMetaData()` Retrieves the number, types and properties of this `PreparedStatement` object's parameters.
`int`	ParameterMetaData.`getParameterMode(int param)` Retrieves the designated parameter's mode.
`int`	ParameterMetaData.`getParameterType(int param)` Retrieves the designated parameter's SQL type.
`String`	ParameterMetaData.`getParameterTypeName(int param)` Retrieves the designated parameter's database-specific type name.
`int`	ParameterMetaData.`getPrecision(int param)` Retrieves the designated parameter's specified column size.
`int`	ResultSetMetaData.`getPrecision(int column)` Get the designated column's specified column size.
`ResultSet`	DatabaseMetaData.`getPrimaryKeys(String catalog, String schema, String table)` Retrieves a description of the given table's primary key columns.
`ResultSet`	DatabaseMetaData.`getProcedureColumns(String catalog, String schemaPattern, String procedureNamePattern, String columnNamePattern)` Retrieves a description of the given catalog's stored procedure parameter and result columns.
`ResultSet`	DatabaseMetaData.`getProcedures(String catalog, String schemaPattern, String procedureNamePattern)` Retrieves a description of the stored procedures available in the given catalog.
`String`	DatabaseMetaData.`getProcedureTerm()` Retrieves the database vendor's preferred term for "procedure".
`DriverPropertyInfo[]`	Driver.`getPropertyInfo(String url, Properties info)` Gets information about the possible properties for this driver.
`ResultSet`	DatabaseMetaData.`getPseudoColumns(String catalog, String schemaPattern, String tableNamePattern, String columnNamePattern)` Retrieves a description of the pseudo or hidden columns available in a given table within the specified catalog and schema.
`int`	Statement.`getQueryTimeout()` Retrieves the number of seconds the driver will wait for a `Statement` object to execute.
`Ref`	CallableStatement.`getRef(int parameterIndex)` Retrieves the value of the designated JDBC `REF(<structured-type>)` parameter as a `Ref` object in the Java programming language.
`Ref`	ResultSet.`getRef(int columnIndex)` Retrieves the value of the designated column in the current row of this `ResultSet` object as a `Ref` object in the Java programming language.
`Ref`	CallableStatement.`getRef(String parameterName)` Retrieves the value of a JDBC `REF(<structured-type>)` parameter as a `Ref` object in the Java programming language.
`Ref`	ResultSet.`getRef(String columnLabel)` Retrieves the value of the designated column in the current row of this `ResultSet` object as a `Ref` object in the Java programming language.
`ResultSet`	Array.`getResultSet()` Retrieves a result set that contains the elements of the SQL `ARRAY` value designated by this `Array` object.
`ResultSet`	Statement.`getResultSet()` Retrieves the current result as a `ResultSet` object.
`ResultSet`	Array.`getResultSet(long index, int count)` Retrieves a result set holding the elements of the subarray that starts at index `index` and contains up to `count` successive elements.
`ResultSet`	Array.`getResultSet(long index, int count, Map<String,Class<?>> map)` Retrieves a result set holding the elements of the subarray that starts at index `index` and contains up to `count` successive elements.
`ResultSet`	Array.`getResultSet(Map<String,Class<?>> map)` Retrieves a result set that contains the elements of the SQL `ARRAY` value designated by this `Array` object.
`int`	Statement.`getResultSetConcurrency()` Retrieves the result set concurrency for `ResultSet` objects generated by this `Statement` object.
`int`	Statement.`getResultSetHoldability()` Retrieves the result set holdability for `ResultSet` objects generated by this `Statement` object.
`int`	DatabaseMetaData.`getResultSetHoldability()` Retrieves this database's default holdability for `ResultSet` objects.
`int`	Statement.`getResultSetType()` Retrieves the result set type for `ResultSet` objects generated by this `Statement` object.
`int`	ResultSet.`getRow()` Retrieves the current row number.
`RowId`	CallableStatement.`getRowId(int parameterIndex)` Retrieves the value of the designated JDBC `ROWID` parameter as a `java.sql.RowId` object.
`RowId`	ResultSet.`getRowId(int columnIndex)` Retrieves the value of the designated column in the current row of this `ResultSet` object as a `java.sql.RowId` object in the Java programming language.
`RowId`	CallableStatement.`getRowId(String parameterName)` Retrieves the value of the designated JDBC `ROWID` parameter as a `java.sql.RowId` object.
`RowId`	ResultSet.`getRowId(String columnLabel)` Retrieves the value of the designated column in the current row of this `ResultSet` object as a `java.sql.RowId` object in the Java programming language.
`RowIdLifetime`	DatabaseMetaData.`getRowIdLifetime()` Indicates whether or not this data source supports the SQL `ROWID` type, and if so the lifetime for which a `RowId` object remains valid.
`int`	Savepoint.`getSavepointId()` Retrieves the generated ID for the savepoint that this `Savepoint` object represents.
`String`	Savepoint.`getSavepointName()` Retrieves the name of the savepoint that this `Savepoint` object represents.
`int`	ParameterMetaData.`getScale(int param)` Retrieves the designated parameter's number of digits to right of the decimal point.
`int`	ResultSetMetaData.`getScale(int column)` Gets the designated column's number of digits to right of the decimal point.
`String`	Connection.`getSchema()` Retrieves this `Connection` object's current schema name.
`String`	ResultSetMetaData.`getSchemaName(int column)` Get the designated column's table's schema.
`ResultSet`	DatabaseMetaData.`getSchemas()` Retrieves the schema names available in this database.
`ResultSet`	DatabaseMetaData.`getSchemas(String catalog, String schemaPattern)` Retrieves the schema names available in this database.
`String`	DatabaseMetaData.`getSchemaTerm()` Retrieves the database vendor's preferred term for "schema".
`String`	DatabaseMetaData.`getSearchStringEscape()` Retrieves the string that can be used to escape wildcard characters.
`short`	CallableStatement.`getShort(int parameterIndex)` Retrieves the value of the designated JDBC `SMALLINT` parameter as a `short` in the Java programming language.
`short`	ResultSet.`getShort(int columnIndex)` Retrieves the value of the designated column in the current row of this `ResultSet` object as a `short` in the Java programming language.
`short`	CallableStatement.`getShort(String parameterName)` Retrieves the value of a JDBC `SMALLINT` parameter as a `short` in the Java programming language.
`short`	ResultSet.`getShort(String columnLabel)` Retrieves the value of the designated column in the current row of this `ResultSet` object as a `short` in the Java programming language.
`<T extends Source> T`	SQLXML.`getSource(Class<T> sourceClass)` Returns a Source for reading the XML value designated by this SQLXML instance.
`String`	DatabaseMetaData.`getSQLKeywords()` Retrieves a comma-separated list of all of this database's SQL keywords that are NOT also SQL:2003 keywords.
`int`	DatabaseMetaData.`getSQLStateType()` Indicates whether the SQLSTATE returned by `SQLException.getSQLState` is X/Open (now known as Open Group) SQL CLI or SQL:2003.
`String`	SQLData.`getSQLTypeName()` Returns the fully-qualified name of the SQL user-defined type that this object represents.
`String`	Struct.`getSQLTypeName()` Retrieves the SQL type name of the SQL structured type that this `Struct` object represents.
`SQLXML`	CallableStatement.`getSQLXML(int parameterIndex)` Retrieves the value of the designated `SQL XML` parameter as a `java.sql.SQLXML` object in the Java programming language.
`SQLXML`	ResultSet.`getSQLXML(int columnIndex)` Retrieves the value of the designated column in the current row of this `ResultSet` as a `java.sql.SQLXML` object in the Java programming language.
`SQLXML`	CallableStatement.`getSQLXML(String parameterName)` Retrieves the value of the designated `SQL XML` parameter as a `java.sql.SQLXML` object in the Java programming language.
`SQLXML`	ResultSet.`getSQLXML(String columnLabel)` Retrieves the value of the designated column in the current row of this `ResultSet` as a `java.sql.SQLXML` object in the Java programming language.
`Statement`	ResultSet.`getStatement()` Retrieves the `Statement` object that produced this `ResultSet` object.
`String`	SQLXML.`getString()` Returns a string representation of the XML value designated by this SQLXML instance.
`String`	CallableStatement.`getString(int parameterIndex)` Retrieves the value of the designated JDBC `CHAR`, `VARCHAR`, or `LONGVARCHAR` parameter as a `String` in the Java programming language.
`String`	ResultSet.`getString(int columnIndex)` Retrieves the value of the designated column in the current row of this `ResultSet` object as a `String` in the Java programming language.
`String`	CallableStatement.`getString(String parameterName)` Retrieves the value of a JDBC `CHAR`, `VARCHAR`, or `LONGVARCHAR` parameter as a `String` in the Java programming language.
`String`	ResultSet.`getString(String columnLabel)` Retrieves the value of the designated column in the current row of this `ResultSet` object as a `String` in the Java programming language.
`String`	DatabaseMetaData.`getStringFunctions()` Retrieves a comma-separated list of string functions available with this database.
`String`	Clob.`getSubString(long pos, int length)` Retrieves a copy of the specified substring in the `CLOB` value designated by this `Clob` object.
`ResultSet`	DatabaseMetaData.`getSuperTables(String catalog, String schemaPattern, String tableNamePattern)` Retrieves a description of the table hierarchies defined in a particular schema in this database.
`ResultSet`	DatabaseMetaData.`getSuperTypes(String catalog, String schemaPattern, String typeNamePattern)` Retrieves a description of the user-defined type (UDT) hierarchies defined in a particular schema in this database.
`String`	DatabaseMetaData.`getSystemFunctions()` Retrieves a comma-separated list of system functions available with this database.
`String`	ResultSetMetaData.`getTableName(int column)` Gets the designated column's table name.
`ResultSet`	DatabaseMetaData.`getTablePrivileges(String catalog, String schemaPattern, String tableNamePattern)` Retrieves a description of the access rights for each table available in a catalog.
`ResultSet`	DatabaseMetaData.`getTables(String catalog, String schemaPattern, String tableNamePattern, String[] types)` Retrieves a description of the tables available in the given catalog.
`ResultSet`	DatabaseMetaData.`getTableTypes()` Retrieves the table types available in this database.
`Time`	CallableStatement.`getTime(int parameterIndex)` Retrieves the value of the designated JDBC `TIME` parameter as a `java.sql.Time` object.
`Time`	ResultSet.`getTime(int columnIndex)` Retrieves the value of the designated column in the current row of this `ResultSet` object as a `java.sql.Time` object in the Java programming language.
`Time`	CallableStatement.`getTime(int parameterIndex, Calendar cal)` Retrieves the value of the designated JDBC `TIME` parameter as a `java.sql.Time` object, using the given `Calendar` object to construct the time.
`Time`	ResultSet.`getTime(int columnIndex, Calendar cal)` Retrieves the value of the designated column in the current row of this `ResultSet` object as a `java.sql.Time` object in the Java programming language.
`Time`	CallableStatement.`getTime(String parameterName)` Retrieves the value of a JDBC `TIME` parameter as a `java.sql.Time` object.
`Time`	ResultSet.`getTime(String columnLabel)` Retrieves the value of the designated column in the current row of this `ResultSet` object as a `java.sql.Time` object in the Java programming language.
`Time`	CallableStatement.`getTime(String parameterName, Calendar cal)` Retrieves the value of a JDBC `TIME` parameter as a `java.sql.Time` object, using the given `Calendar` object to construct the time.
`Time`	ResultSet.`getTime(String columnLabel, Calendar cal)` Retrieves the value of the designated column in the current row of this `ResultSet` object as a `java.sql.Time` object in the Java programming language.
`String`	DatabaseMetaData.`getTimeDateFunctions()` Retrieves a comma-separated list of the time and date functions available with this database.
`Timestamp`	CallableStatement.`getTimestamp(int parameterIndex)` Retrieves the value of the designated JDBC `TIMESTAMP` parameter as a `java.sql.Timestamp` object.
`Timestamp`	ResultSet.`getTimestamp(int columnIndex)` Retrieves the value of the designated column in the current row of this `ResultSet` object as a `java.sql.Timestamp` object in the Java programming language.
`Timestamp`	CallableStatement.`getTimestamp(int parameterIndex, Calendar cal)` Retrieves the value of the designated JDBC `TIMESTAMP` parameter as a `java.sql.Timestamp` object, using the given `Calendar` object to construct the `Timestamp` object.
`Timestamp`	ResultSet.`getTimestamp(int columnIndex, Calendar cal)` Retrieves the value of the designated column in the current row of this `ResultSet` object as a `java.sql.Timestamp` object in the Java programming language.
`Timestamp`	CallableStatement.`getTimestamp(String parameterName)` Retrieves the value of a JDBC `TIMESTAMP` parameter as a `java.sql.Timestamp` object.
`Timestamp`	ResultSet.`getTimestamp(String columnLabel)` Retrieves the value of the designated column in the current row of this `ResultSet` object as a `java.sql.Timestamp` object in the Java programming language.
`Timestamp`	CallableStatement.`getTimestamp(String parameterName, Calendar cal)` Retrieves the value of a JDBC `TIMESTAMP` parameter as a `java.sql.Timestamp` object, using the given `Calendar` object to construct the `Timestamp` object.
`Timestamp`	ResultSet.`getTimestamp(String columnLabel, Calendar cal)` Retrieves the value of the designated column in the current row of this `ResultSet` object as a `java.sql.Timestamp` object in the Java programming language.
`int`	Connection.`getTransactionIsolation()` Retrieves this `Connection` object's current transaction isolation level.
`int`	ResultSet.`getType()` Retrieves the type of this `ResultSet` object.
`ResultSet`	DatabaseMetaData.`getTypeInfo()` Retrieves a description of all the data types supported by this database.
`Map<String,Class<?>>`	Connection.`getTypeMap()` Retrieves the `Map` object associated with this `Connection` object.
`ResultSet`	DatabaseMetaData.`getUDTs(String catalog, String schemaPattern, String typeNamePattern, int[] types)` Retrieves a description of the user-defined types (UDTs) defined in a particular schema.
`InputStream`	ResultSet.`getUnicodeStream(int columnIndex)` Deprecated. use `getCharacterStream` in place of `getUnicodeStream`
`InputStream`	ResultSet.`getUnicodeStream(String columnLabel)` Deprecated. use `getCharacterStream` instead
`int`	Statement.`getUpdateCount()` Retrieves the current result as an update count; if the result is a `ResultSet` object or there are no more results, -1 is returned.
`String`	DatabaseMetaData.`getURL()` Retrieves the URL for this DBMS.
`URL`	CallableStatement.`getURL(int parameterIndex)` Retrieves the value of the designated JDBC `DATALINK` parameter as a `java.net.URL` object.
`URL`	ResultSet.`getURL(int columnIndex)` Retrieves the value of the designated column in the current row of this `ResultSet` object as a `java.net.URL` object in the Java programming language.
`URL`	CallableStatement.`getURL(String parameterName)` Retrieves the value of a JDBC `DATALINK` parameter as a `java.net.URL` object.
`URL`	ResultSet.`getURL(String columnLabel)` Retrieves the value of the designated column in the current row of this `ResultSet` object as a `java.net.URL` object in the Java programming language.
`String`	DatabaseMetaData.`getUserName()` Retrieves the user name as known to this database.
`ResultSet`	DatabaseMetaData.`getVersionColumns(String catalog, String schema, String table)` Retrieves a description of a table's columns that are automatically updated when any value in a row is updated.
`SQLWarning`	Statement.`getWarnings()` Retrieves the first warning reported by calls on this `Statement` object.
`SQLWarning`	ResultSet.`getWarnings()` Retrieves the first warning reported by calls on this `ResultSet` object.
`SQLWarning`	Connection.`getWarnings()` Retrieves the first warning reported by calls on this `Connection` object.
`void`	ResultSet.`insertRow()` Inserts the contents of the insert row into this `ResultSet` object and into the database.
`boolean`	DatabaseMetaData.`insertsAreDetected(int type)` Retrieves whether or not a visible row insert can be detected by calling the method `ResultSet.rowInserted`.
`boolean`	ResultSet.`isAfterLast()` Retrieves whether the cursor is after the last row in this `ResultSet` object.
`boolean`	ResultSetMetaData.`isAutoIncrement(int column)` Indicates whether the designated column is automatically numbered.
`boolean`	ResultSet.`isBeforeFirst()` Retrieves whether the cursor is before the first row in this `ResultSet` object.
`boolean`	ResultSetMetaData.`isCaseSensitive(int column)` Indicates whether a column's case matters.
`boolean`	DatabaseMetaData.`isCatalogAtStart()` Retrieves whether a catalog appears at the start of a fully qualified table name.
`boolean`	Statement.`isClosed()` Retrieves whether this `Statement` object has been closed.
`boolean`	ResultSet.`isClosed()` Retrieves whether this `ResultSet` object has been closed.
`boolean`	Connection.`isClosed()` Retrieves whether this `Connection` object has been closed.
`boolean`	Statement.`isCloseOnCompletion()` Returns a value indicating whether this `Statement` will be closed when all its dependent result sets are closed.
`boolean`	ResultSetMetaData.`isCurrency(int column)` Indicates whether the designated column is a cash value.
`boolean`	ResultSetMetaData.`isDefinitelyWritable(int column)` Indicates whether a write on the designated column will definitely succeed.
`boolean`	ResultSet.`isFirst()` Retrieves whether the cursor is on the first row of this `ResultSet` object.
`boolean`	ResultSet.`isLast()` Retrieves whether the cursor is on the last row of this `ResultSet` object.
`int`	ParameterMetaData.`isNullable(int param)` Retrieves whether null values are allowed in the designated parameter.
`int`	ResultSetMetaData.`isNullable(int column)` Indicates the nullability of values in the designated column.
`boolean`	Statement.`isPoolable()` Returns a value indicating whether the `Statement` is poolable or not.
`boolean`	DatabaseMetaData.`isReadOnly()` Retrieves whether this database is in read-only mode.
`boolean`	Connection.`isReadOnly()` Retrieves whether this `Connection` object is in read-only mode.
`boolean`	ResultSetMetaData.`isReadOnly(int column)` Indicates whether the designated column is definitely not writable.
`boolean`	ResultSetMetaData.`isSearchable(int column)` Indicates whether the designated column can be used in a where clause.
`boolean`	ParameterMetaData.`isSigned(int param)` Retrieves whether values for the designated parameter can be signed numbers.
`boolean`	ResultSetMetaData.`isSigned(int column)` Indicates whether values in the designated column are signed numbers.
`boolean`	Connection.`isValid(int timeout)` Returns true if the connection has not been closed and is still valid.
`boolean`	Wrapper.`isWrapperFor(Class<?> iface)` Returns true if this either implements the interface argument or is directly or indirectly a wrapper for an object that does.
`boolean`	ResultSetMetaData.`isWritable(int column)` Indicates whether it is possible for a write on the designated column to succeed.
`boolean`	ResultSet.`last()` Moves the cursor to the last row in this `ResultSet` object.
`long`	Clob.`length()` Retrieves the number of characters in the `CLOB` value designated by this `Clob` object.
`long`	Blob.`length()` Returns the number of bytes in the `BLOB` value designated by this `Blob` object.
`boolean`	DatabaseMetaData.`locatorsUpdateCopy()` Indicates whether updates made to a LOB are made on a copy or directly to the LOB.
`void`	ResultSet.`moveToCurrentRow()` Moves the cursor to the remembered cursor position, usually the current row.
`void`	ResultSet.`moveToInsertRow()` Moves the cursor to the insert row.
`String`	Connection.`nativeSQL(String sql)` Converts the given SQL statement into the system's native SQL grammar.
`boolean`	ResultSet.`next()` Moves the cursor forward one row from its current position.
`boolean`	DatabaseMetaData.`nullPlusNonNullIsNull()` Retrieves whether this database supports concatenations between `NULL` and non-`NULL` values being `NULL`.
`boolean`	DatabaseMetaData.`nullsAreSortedAtEnd()` Retrieves whether `NULL` values are sorted at the end regardless of sort order.
`boolean`	DatabaseMetaData.`nullsAreSortedAtStart()` Retrieves whether `NULL` values are sorted at the start regardless of sort order.
`boolean`	DatabaseMetaData.`nullsAreSortedHigh()` Retrieves whether `NULL` values are sorted high.
`boolean`	DatabaseMetaData.`nullsAreSortedLow()` Retrieves whether `NULL` values are sorted low.
`boolean`	DatabaseMetaData.`othersDeletesAreVisible(int type)` Retrieves whether deletes made by others are visible.
`boolean`	DatabaseMetaData.`othersInsertsAreVisible(int type)` Retrieves whether inserts made by others are visible.
`boolean`	DatabaseMetaData.`othersUpdatesAreVisible(int type)` Retrieves whether updates made by others are visible.
`boolean`	DatabaseMetaData.`ownDeletesAreVisible(int type)` Retrieves whether a result set's own deletes are visible.
`boolean`	DatabaseMetaData.`ownInsertsAreVisible(int type)` Retrieves whether a result set's own inserts are visible.
`boolean`	DatabaseMetaData.`ownUpdatesAreVisible(int type)` Retrieves whether for the given type of `ResultSet` object, the result set's own updates are visible.
`long`	Blob.`position(Blob pattern, long start)` Retrieves the byte position in the `BLOB` value designated by this `Blob` object at which `pattern` begins.
`long`	Blob.`position(byte[] pattern, long start)` Retrieves the byte position at which the specified byte array `pattern` begins within the `BLOB` value that this `Blob` object represents.
`long`	Clob.`position(Clob searchstr, long start)` Retrieves the character position at which the specified `Clob` object `searchstr` appears in this `Clob` object.
`long`	Clob.`position(String searchstr, long start)` Retrieves the character position at which the specified substring `searchstr` appears in the SQL `CLOB` value represented by this `Clob` object.
`CallableStatement`	Connection.`prepareCall(String sql)` Creates a `CallableStatement` object for calling database stored procedures.
`CallableStatement`	Connection.`prepareCall(String sql, int resultSetType, int resultSetConcurrency)` Creates a `CallableStatement` object that will generate `ResultSet` objects with the given type and concurrency.
`CallableStatement`	Connection.`prepareCall(String sql, int resultSetType, int resultSetConcurrency, int resultSetHoldability)` Creates a `CallableStatement` object that will generate `ResultSet` objects with the given type and concurrency.
`PreparedStatement`	Connection.`prepareStatement(String sql)` Creates a `PreparedStatement` object for sending parameterized SQL statements to the database.
`PreparedStatement`	Connection.`prepareStatement(String sql, int autoGeneratedKeys)` Creates a default `PreparedStatement` object that has the capability to retrieve auto-generated keys.
`PreparedStatement`	Connection.`prepareStatement(String sql, int[] columnIndexes)` Creates a default `PreparedStatement` object capable of returning the auto-generated keys designated by the given array.
`PreparedStatement`	Connection.`prepareStatement(String sql, int resultSetType, int resultSetConcurrency)` Creates a `PreparedStatement` object that will generate `ResultSet` objects with the given type and concurrency.
`PreparedStatement`	Connection.`prepareStatement(String sql, int resultSetType, int resultSetConcurrency, int resultSetHoldability)` Creates a `PreparedStatement` object that will generate `ResultSet` objects with the given type, concurrency, and holdability.
`PreparedStatement`	Connection.`prepareStatement(String sql, String[] columnNames)` Creates a default `PreparedStatement` object capable of returning the auto-generated keys designated by the given array.
`boolean`	ResultSet.`previous()` Moves the cursor to the previous row in this `ResultSet` object.
`Array`	SQLInput.`readArray()` Reads an SQL `ARRAY` value from the stream and returns it as an `Array` object in the Java programming language.
`InputStream`	SQLInput.`readAsciiStream()` Reads the next attribute in the stream and returns it as a stream of ASCII characters.
`BigDecimal`	SQLInput.`readBigDecimal()` Reads the next attribute in the stream and returns it as a `java.math.BigDecimal` object in the Java programming language.
`InputStream`	SQLInput.`readBinaryStream()` Reads the next attribute in the stream and returns it as a stream of uninterpreted bytes.
`Blob`	SQLInput.`readBlob()` Reads an SQL `BLOB` value from the stream and returns it as a `Blob` object in the Java programming language.
`boolean`	SQLInput.`readBoolean()` Reads the next attribute in the stream and returns it as a `boolean` in the Java programming language.
`byte`	SQLInput.`readByte()` Reads the next attribute in the stream and returns it as a `byte` in the Java programming language.
`byte[]`	SQLInput.`readBytes()` Reads the next attribute in the stream and returns it as an array of bytes in the Java programming language.
`Reader`	SQLInput.`readCharacterStream()` Reads the next attribute in the stream and returns it as a stream of Unicode characters.
`Clob`	SQLInput.`readClob()` Reads an SQL `CLOB` value from the stream and returns it as a `Clob` object in the Java programming language.
`Date`	SQLInput.`readDate()` Reads the next attribute in the stream and returns it as a `java.sql.Date` object.
`double`	SQLInput.`readDouble()` Reads the next attribute in the stream and returns it as a `double` in the Java programming language.
`float`	SQLInput.`readFloat()` Reads the next attribute in the stream and returns it as a `float` in the Java programming language.
`int`	SQLInput.`readInt()` Reads the next attribute in the stream and returns it as an `int` in the Java programming language.
`long`	SQLInput.`readLong()` Reads the next attribute in the stream and returns it as a `long` in the Java programming language.
`NClob`	SQLInput.`readNClob()` Reads an SQL `NCLOB` value from the stream and returns it as a `NClob` object in the Java programming language.
`String`	SQLInput.`readNString()` Reads the next attribute in the stream and returns it as a `String` in the Java programming language.
`Object`	SQLInput.`readObject()` Reads the datum at the head of the stream and returns it as an `Object` in the Java programming language.
`default <T> T`	SQLInput.`readObject(Class<T> type)` Reads the next attribute in the stream and returns it as an `Object` in the Java programming language.
`Ref`	SQLInput.`readRef()` Reads an SQL `REF` value from the stream and returns it as a `Ref` object in the Java programming language.
`RowId`	SQLInput.`readRowId()` Reads an SQL `ROWID` value from the stream and returns it as a `RowId` object in the Java programming language.
`short`	SQLInput.`readShort()` Reads the next attribute in the stream and returns it as a `short` in the Java programming language.
`void`	SQLData.`readSQL(SQLInput stream, String typeName)` Populates this object with data read from the database.
`SQLXML`	SQLInput.`readSQLXML()` Reads an SQL `XML` value from the stream and returns it as a `SQLXML` object in the Java programming language.
`String`	SQLInput.`readString()` Reads the next attribute in the stream and returns it as a `String` in the Java programming language.
`Time`	SQLInput.`readTime()` Reads the next attribute in the stream and returns it as a `java.sql.Time` object.
`Timestamp`	SQLInput.`readTimestamp()` Reads the next attribute in the stream and returns it as a `java.sql.Timestamp` object.
`URL`	SQLInput.`readURL()` Reads an SQL `DATALINK` value from the stream and returns it as a `java.net.URL` object in the Java programming language.
`void`	ResultSet.`refreshRow()` Refreshes the current row with its most recent value in the database.
`static void`	DriverManager.`registerDriver(Driver driver)` Registers the given driver with the `DriverManager`.
`static void`	DriverManager.`registerDriver(Driver driver, DriverAction da)` Registers the given driver with the `DriverManager`.
`void`	CallableStatement.`registerOutParameter(int parameterIndex, int sqlType)` Registers the OUT parameter in ordinal position `parameterIndex` to the JDBC type `sqlType`.
`void`	CallableStatement.`registerOutParameter(int parameterIndex, int sqlType, int scale)` Registers the parameter in ordinal position `parameterIndex` to be of JDBC type `sqlType`.
`void`	CallableStatement.`registerOutParameter(int parameterIndex, int sqlType, String typeName)` Registers the designated output parameter.
`default void`	CallableStatement.`registerOutParameter(int parameterIndex, SQLType sqlType)` Registers the OUT parameter in ordinal position `parameterIndex` to the JDBC type `sqlType`.
`default void`	CallableStatement.`registerOutParameter(int parameterIndex, SQLType sqlType, int scale)` Registers the parameter in ordinal position `parameterIndex` to be of JDBC type `sqlType`.
`default void`	CallableStatement.`registerOutParameter(int parameterIndex, SQLType sqlType, String typeName)` Registers the designated output parameter.
`void`	CallableStatement.`registerOutParameter(String parameterName, int sqlType)` Registers the OUT parameter named `parameterName` to the JDBC type `sqlType`.
`void`	CallableStatement.`registerOutParameter(String parameterName, int sqlType, int scale)` Registers the parameter named `parameterName` to be of JDBC type `sqlType`.
`void`	CallableStatement.`registerOutParameter(String parameterName, int sqlType, String typeName)` Registers the designated output parameter.
`default void`	CallableStatement.`registerOutParameter(String parameterName, SQLType sqlType)` Registers the OUT parameter named `parameterName` to the JDBC type `sqlType`.
`default void`	CallableStatement.`registerOutParameter(String parameterName, SQLType sqlType, int scale)` Registers the parameter named `parameterName` to be of JDBC type `sqlType`.
`default void`	CallableStatement.`registerOutParameter(String parameterName, SQLType sqlType, String typeName)` Registers the designated output parameter.
`boolean`	ResultSet.`relative(int rows)` Moves the cursor a relative number of rows, either positive or negative.
`void`	Connection.`releaseSavepoint(Savepoint savepoint)` Removes the specified `Savepoint` and subsequent `Savepoint` objects from the current transaction.
`void`	Connection.`rollback()` Undoes all changes made in the current transaction and releases any database locks currently held by this `Connection` object.
`void`	Connection.`rollback(Savepoint savepoint)` Undoes all changes made after the given `Savepoint` object was set.
`boolean`	ResultSet.`rowDeleted()` Retrieves whether a row has been deleted.
`boolean`	ResultSet.`rowInserted()` Retrieves whether the current row has had an insertion.
`boolean`	ResultSet.`rowUpdated()` Retrieves whether the current row has been updated.
`void`	PreparedStatement.`setArray(int parameterIndex, Array x)` Sets the designated parameter to the given `java.sql.Array` object.
`void`	PreparedStatement.`setAsciiStream(int parameterIndex, InputStream x)` Sets the designated parameter to the given input stream.
`void`	PreparedStatement.`setAsciiStream(int parameterIndex, InputStream x, int length)` Sets the designated parameter to the given input stream, which will have the specified number of bytes.
`void`	PreparedStatement.`setAsciiStream(int parameterIndex, InputStream x, long length)` Sets the designated parameter to the given input stream, which will have the specified number of bytes.
`OutputStream`	Clob.`setAsciiStream(long pos)` Retrieves a stream to be used to write Ascii characters to the `CLOB` value that this `Clob` object represents, starting at position `pos`.
`void`	CallableStatement.`setAsciiStream(String parameterName, InputStream x)` Sets the designated parameter to the given input stream.
`void`	CallableStatement.`setAsciiStream(String parameterName, InputStream x, int length)` Sets the designated parameter to the given input stream, which will have the specified number of bytes.
`void`	CallableStatement.`setAsciiStream(String parameterName, InputStream x, long length)` Sets the designated parameter to the given input stream, which will have the specified number of bytes.
`void`	Connection.`setAutoCommit(boolean autoCommit)` Sets this connection's auto-commit mode to the given state.
`void`	PreparedStatement.`setBigDecimal(int parameterIndex, BigDecimal x)` Sets the designated parameter to the given `java.math.BigDecimal` value.
`void`	CallableStatement.`setBigDecimal(String parameterName, BigDecimal x)` Sets the designated parameter to the given `java.math.BigDecimal` value.
`OutputStream`	SQLXML.`setBinaryStream()` Retrieves a stream that can be used to write the XML value that this SQLXML instance represents.
`void`	PreparedStatement.`setBinaryStream(int parameterIndex, InputStream x)` Sets the designated parameter to the given input stream.
`void`	PreparedStatement.`setBinaryStream(int parameterIndex, InputStream x, int length)` Sets the designated parameter to the given input stream, which will have the specified number of bytes.
`void`	PreparedStatement.`setBinaryStream(int parameterIndex, InputStream x, long length)` Sets the designated parameter to the given input stream, which will have the specified number of bytes.
`OutputStream`	Blob.`setBinaryStream(long pos)` Retrieves a stream that can be used to write to the `BLOB` value that this `Blob` object represents.
`void`	CallableStatement.`setBinaryStream(String parameterName, InputStream x)` Sets the designated parameter to the given input stream.
`void`	CallableStatement.`setBinaryStream(String parameterName, InputStream x, int length)` Sets the designated parameter to the given input stream, which will have the specified number of bytes.
`void`	CallableStatement.`setBinaryStream(String parameterName, InputStream x, long length)` Sets the designated parameter to the given input stream, which will have the specified number of bytes.
`void`	PreparedStatement.`setBlob(int parameterIndex, Blob x)` Sets the designated parameter to the given `java.sql.Blob` object.
`void`	PreparedStatement.`setBlob(int parameterIndex, InputStream inputStream)` Sets the designated parameter to a `InputStream` object.
`void`	PreparedStatement.`setBlob(int parameterIndex, InputStream inputStream, long length)` Sets the designated parameter to a `InputStream` object.
`void`	CallableStatement.`setBlob(String parameterName, Blob x)` Sets the designated parameter to the given `java.sql.Blob` object.
`void`	CallableStatement.`setBlob(String parameterName, InputStream inputStream)` Sets the designated parameter to a `InputStream` object.
`void`	CallableStatement.`setBlob(String parameterName, InputStream inputStream, long length)` Sets the designated parameter to a `InputStream` object.
`void`	PreparedStatement.`setBoolean(int parameterIndex, boolean x)` Sets the designated parameter to the given Java `boolean` value.
`void`	CallableStatement.`setBoolean(String parameterName, boolean x)` Sets the designated parameter to the given Java `boolean` value.
`void`	PreparedStatement.`setByte(int parameterIndex, byte x)` Sets the designated parameter to the given Java `byte` value.
`void`	CallableStatement.`setByte(String parameterName, byte x)` Sets the designated parameter to the given Java `byte` value.
`void`	PreparedStatement.`setBytes(int parameterIndex, byte[] x)` Sets the designated parameter to the given Java array of bytes.
`int`	Blob.`setBytes(long pos, byte[] bytes)` Writes the given array of bytes to the `BLOB` value that this `Blob` object represents, starting at position `pos`, and returns the number of bytes written.
`int`	Blob.`setBytes(long pos, byte[] bytes, int offset, int len)` Writes all or part of the given `byte` array to the `BLOB` value that this `Blob` object represents and returns the number of bytes written.
`void`	CallableStatement.`setBytes(String parameterName, byte[] x)` Sets the designated parameter to the given Java array of bytes.
`void`	Connection.`setCatalog(String catalog)` Sets the given catalog name in order to select a subspace of this `Connection` object's database in which to work.
`Writer`	SQLXML.`setCharacterStream()` Retrieves a stream to be used to write the XML value that this SQLXML instance represents.
`void`	PreparedStatement.`setCharacterStream(int parameterIndex, Reader reader)` Sets the designated parameter to the given `Reader` object.
`void`	PreparedStatement.`setCharacterStream(int parameterIndex, Reader reader, int length)` Sets the designated parameter to the given `Reader` object, which is the given number of characters long.
`void`	PreparedStatement.`setCharacterStream(int parameterIndex, Reader reader, long length)` Sets the designated parameter to the given `Reader` object, which is the given number of characters long.
`Writer`	Clob.`setCharacterStream(long pos)` Retrieves a stream to be used to write a stream of Unicode characters to the `CLOB` value that this `Clob` object represents, at position `pos`.
`void`	CallableStatement.`setCharacterStream(String parameterName, Reader reader)` Sets the designated parameter to the given `Reader` object.
`void`	CallableStatement.`setCharacterStream(String parameterName, Reader reader, int length)` Sets the designated parameter to the given `Reader` object, which is the given number of characters long.
`void`	CallableStatement.`setCharacterStream(String parameterName, Reader reader, long length)` Sets the designated parameter to the given `Reader` object, which is the given number of characters long.
`void`	PreparedStatement.`setClob(int parameterIndex, Clob x)` Sets the designated parameter to the given `java.sql.Clob` object.
`void`	PreparedStatement.`setClob(int parameterIndex, Reader reader)` Sets the designated parameter to a `Reader` object.
`void`	PreparedStatement.`setClob(int parameterIndex, Reader reader, long length)` Sets the designated parameter to a `Reader` object.
`void`	CallableStatement.`setClob(String parameterName, Clob x)` Sets the designated parameter to the given `java.sql.Clob` object.
`void`	CallableStatement.`setClob(String parameterName, Reader reader)` Sets the designated parameter to a `Reader` object.
`void`	CallableStatement.`setClob(String parameterName, Reader reader, long length)` Sets the designated parameter to a `Reader` object.
`void`	Statement.`setCursorName(String name)` Sets the SQL cursor name to the given `String`, which will be used by subsequent `Statement` object `execute` methods.
`void`	PreparedStatement.`setDate(int parameterIndex, Date x)` Sets the designated parameter to the given `java.sql.Date` value using the default time zone of the virtual machine that is running the application.
`void`	PreparedStatement.`setDate(int parameterIndex, Date x, Calendar cal)` Sets the designated parameter to the given `java.sql.Date` value, using the given `Calendar` object.
`void`	CallableStatement.`setDate(String parameterName, Date x)` Sets the designated parameter to the given `java.sql.Date` value using the default time zone of the virtual machine that is running the application.
`void`	CallableStatement.`setDate(String parameterName, Date x, Calendar cal)` Sets the designated parameter to the given `java.sql.Date` value, using the given `Calendar` object.
`void`	PreparedStatement.`setDouble(int parameterIndex, double x)` Sets the designated parameter to the given Java `double` value.
`void`	CallableStatement.`setDouble(String parameterName, double x)` Sets the designated parameter to the given Java `double` value.
`void`	Statement.`setEscapeProcessing(boolean enable)` Sets escape processing on or off.
`void`	Statement.`setFetchDirection(int direction)` Gives the driver a hint as to the direction in which rows will be processed in `ResultSet` objects created using this `Statement` object.
`void`	ResultSet.`setFetchDirection(int direction)` Gives a hint as to the direction in which the rows in this `ResultSet` object will be processed.
`void`	Statement.`setFetchSize(int rows)` Gives the JDBC driver a hint as to the number of rows that should be fetched from the database when more rows are needed for `ResultSet` objects generated by this `Statement`.
`void`	ResultSet.`setFetchSize(int rows)` Gives the JDBC driver a hint as to the number of rows that should be fetched from the database when more rows are needed for this `ResultSet` object.
`void`	PreparedStatement.`setFloat(int parameterIndex, float x)` Sets the designated parameter to the given Java `float` value.
`void`	CallableStatement.`setFloat(String parameterName, float x)` Sets the designated parameter to the given Java `float` value.
`void`	Connection.`setHoldability(int holdability)` Changes the default holdability of `ResultSet` objects created using this `Connection` object to the given holdability.
`void`	PreparedStatement.`setInt(int parameterIndex, int x)` Sets the designated parameter to the given Java `int` value.
`void`	CallableStatement.`setInt(String parameterName, int x)` Sets the designated parameter to the given Java `int` value.
`default void`	Statement.`setLargeMaxRows(long max)` Sets the limit for the maximum number of rows that any `ResultSet` object generated by this `Statement` object can contain to the given number.
`void`	PreparedStatement.`setLong(int parameterIndex, long x)` Sets the designated parameter to the given Java `long` value.
`void`	CallableStatement.`setLong(String parameterName, long x)` Sets the designated parameter to the given Java `long` value.
`void`	Statement.`setMaxFieldSize(int max)` Sets the limit for the maximum number of bytes that can be returned for character and binary column values in a `ResultSet` object produced by this `Statement` object.
`void`	Statement.`setMaxRows(int max)` Sets the limit for the maximum number of rows that any `ResultSet` object generated by this `Statement` object can contain to the given number.
`void`	PreparedStatement.`setNCharacterStream(int parameterIndex, Reader value)` Sets the designated parameter to a `Reader` object.
`void`	PreparedStatement.`setNCharacterStream(int parameterIndex, Reader value, long length)` Sets the designated parameter to a `Reader` object.
`void`	CallableStatement.`setNCharacterStream(String parameterName, Reader value)` Sets the designated parameter to a `Reader` object.
`void`	CallableStatement.`setNCharacterStream(String parameterName, Reader value, long length)` Sets the designated parameter to a `Reader` object.
`void`	PreparedStatement.`setNClob(int parameterIndex, NClob value)` Sets the designated parameter to a `java.sql.NClob` object.
`void`	PreparedStatement.`setNClob(int parameterIndex, Reader reader)` Sets the designated parameter to a `Reader` object.
`void`	PreparedStatement.`setNClob(int parameterIndex, Reader reader, long length)` Sets the designated parameter to a `Reader` object.
`void`	CallableStatement.`setNClob(String parameterName, NClob value)` Sets the designated parameter to a `java.sql.NClob` object.
`void`	CallableStatement.`setNClob(String parameterName, Reader reader)` Sets the designated parameter to a `Reader` object.
`void`	CallableStatement.`setNClob(String parameterName, Reader reader, long length)` Sets the designated parameter to a `Reader` object.
`void`	Connection.`setNetworkTimeout(Executor executor, int milliseconds)` Sets the maximum period a `Connection` or objects created from the `Connection` will wait for the database to reply to any one request.
`void`	PreparedStatement.`setNString(int parameterIndex, String value)` Sets the designated parameter to the given `String` object.
`void`	CallableStatement.`setNString(String parameterName, String value)` Sets the designated parameter to the given `String` object.
`void`	PreparedStatement.`setNull(int parameterIndex, int sqlType)` Sets the designated parameter to SQL `NULL`.
`void`	PreparedStatement.`setNull(int parameterIndex, int sqlType, String typeName)` Sets the designated parameter to SQL `NULL`.
`void`	CallableStatement.`setNull(String parameterName, int sqlType)` Sets the designated parameter to SQL `NULL`.
`void`	CallableStatement.`setNull(String parameterName, int sqlType, String typeName)` Sets the designated parameter to SQL `NULL`.
`void`	PreparedStatement.`setObject(int parameterIndex, Object x)` Sets the value of the designated parameter using the given object.
`void`	PreparedStatement.`setObject(int parameterIndex, Object x, int targetSqlType)` Sets the value of the designated parameter with the given object.
`void`	PreparedStatement.`setObject(int parameterIndex, Object x, int targetSqlType, int scaleOrLength)` Sets the value of the designated parameter with the given object.
`default void`	PreparedStatement.`setObject(int parameterIndex, Object x, SQLType targetSqlType)` Sets the value of the designated parameter with the given object.
`default void`	PreparedStatement.`setObject(int parameterIndex, Object x, SQLType targetSqlType, int scaleOrLength)` Sets the value of the designated parameter with the given object.
`void`	Ref.`setObject(Object value)` Sets the structured type value that this `Ref` object references to the given instance of `Object`.
`void`	CallableStatement.`setObject(String parameterName, Object x)` Sets the value of the designated parameter with the given object.
`void`	CallableStatement.`setObject(String parameterName, Object x, int targetSqlType)` Sets the value of the designated parameter with the given object.
`void`	CallableStatement.`setObject(String parameterName, Object x, int targetSqlType, int scale)` Sets the value of the designated parameter with the given object.
`default void`	CallableStatement.`setObject(String parameterName, Object x, SQLType targetSqlType)` Sets the value of the designated parameter with the given object.
`default void`	CallableStatement.`setObject(String parameterName, Object x, SQLType targetSqlType, int scaleOrLength)` Sets the value of the designated parameter with the given object.
`void`	Statement.`setPoolable(boolean poolable)` Requests that a `Statement` be pooled or not pooled.
`void`	Statement.`setQueryTimeout(int seconds)` Sets the number of seconds the driver will wait for a `Statement` object to execute to the given number of seconds.
`void`	Connection.`setReadOnly(boolean readOnly)` Puts this connection in read-only mode as a hint to the driver to enable database optimizations.
`void`	PreparedStatement.`setRef(int parameterIndex, Ref x)` Sets the designated parameter to the given `REF(<structured-type>)` value.
`<T extends Result> T`	SQLXML.`setResult(Class<T> resultClass)` Returns a Result for setting the XML value designated by this SQLXML instance.
`void`	PreparedStatement.`setRowId(int parameterIndex, RowId x)` Sets the designated parameter to the given `java.sql.RowId` object.
`void`	CallableStatement.`setRowId(String parameterName, RowId x)` Sets the designated parameter to the given `java.sql.RowId` object.
`Savepoint`	Connection.`setSavepoint()` Creates an unnamed savepoint in the current transaction and returns the new `Savepoint` object that represents it.
`Savepoint`	Connection.`setSavepoint(String name)` Creates a savepoint with the given name in the current transaction and returns the new `Savepoint` object that represents it.
`void`	Connection.`setSchema(String schema)` Sets the given schema name to access.
`void`	PreparedStatement.`setShort(int parameterIndex, short x)` Sets the designated parameter to the given Java `short` value.
`void`	CallableStatement.`setShort(String parameterName, short x)` Sets the designated parameter to the given Java `short` value.
`void`	PreparedStatement.`setSQLXML(int parameterIndex, SQLXML xmlObject)` Sets the designated parameter to the given `java.sql.SQLXML` object.
`void`	CallableStatement.`setSQLXML(String parameterName, SQLXML xmlObject)` Sets the designated parameter to the given `java.sql.SQLXML` object.
`void`	PreparedStatement.`setString(int parameterIndex, String x)` Sets the designated parameter to the given Java `String` value.
`int`	Clob.`setString(long pos, String str)` Writes the given Java `String` to the `CLOB` value that this `Clob` object designates at the position `pos`.
`int`	Clob.`setString(long pos, String str, int offset, int len)` Writes `len` characters of `str`, starting at character `offset`, to the `CLOB` value that this `Clob` represents.
`void`	SQLXML.`setString(String value)` Sets the XML value designated by this SQLXML instance to the given String representation.
`void`	CallableStatement.`setString(String parameterName, String x)` Sets the designated parameter to the given Java `String` value.
`void`	PreparedStatement.`setTime(int parameterIndex, Time x)` Sets the designated parameter to the given `java.sql.Time` value.
`void`	PreparedStatement.`setTime(int parameterIndex, Time x, Calendar cal)` Sets the designated parameter to the given `java.sql.Time` value, using the given `Calendar` object.
`void`	CallableStatement.`setTime(String parameterName, Time x)` Sets the designated parameter to the given `java.sql.Time` value.
`void`	CallableStatement.`setTime(String parameterName, Time x, Calendar cal)` Sets the designated parameter to the given `java.sql.Time` value, using the given `Calendar` object.
`void`	PreparedStatement.`setTimestamp(int parameterIndex, Timestamp x)` Sets the designated parameter to the given `java.sql.Timestamp` value.
`void`	PreparedStatement.`setTimestamp(int parameterIndex, Timestamp x, Calendar cal)` Sets the designated parameter to the given `java.sql.Timestamp` value, using the given `Calendar` object.
`void`	CallableStatement.`setTimestamp(String parameterName, Timestamp x)` Sets the designated parameter to the given `java.sql.Timestamp` value.
`void`	CallableStatement.`setTimestamp(String parameterName, Timestamp x, Calendar cal)` Sets the designated parameter to the given `java.sql.Timestamp` value, using the given `Calendar` object.
`void`	Connection.`setTransactionIsolation(int level)` Attempts to change the transaction isolation level for this `Connection` object to the one given.
`void`	Connection.`setTypeMap(Map<String,Class<?>> map)` Installs the given `TypeMap` object as the type map for this `Connection` object.
`void`	PreparedStatement.`setUnicodeStream(int parameterIndex, InputStream x, int length)` Deprecated. Use `setCharacterStream`
`void`	PreparedStatement.`setURL(int parameterIndex, URL x)` Sets the designated parameter to the given `java.net.URL` value.
`void`	CallableStatement.`setURL(String parameterName, URL val)` Sets the designated parameter to the given `java.net.URL` object.
`boolean`	DatabaseMetaData.`storesLowerCaseIdentifiers()` Retrieves whether this database treats mixed case unquoted SQL identifiers as case insensitive and stores them in lower case.
`boolean`	DatabaseMetaData.`storesLowerCaseQuotedIdentifiers()` Retrieves whether this database treats mixed case quoted SQL identifiers as case insensitive and stores them in lower case.
`boolean`	DatabaseMetaData.`storesMixedCaseIdentifiers()` Retrieves whether this database treats mixed case unquoted SQL identifiers as case insensitive and stores them in mixed case.
`boolean`	DatabaseMetaData.`storesMixedCaseQuotedIdentifiers()` Retrieves whether this database treats mixed case quoted SQL identifiers as case insensitive and stores them in mixed case.
`boolean`	DatabaseMetaData.`storesUpperCaseIdentifiers()` Retrieves whether this database treats mixed case unquoted SQL identifiers as case insensitive and stores them in upper case.
`boolean`	DatabaseMetaData.`storesUpperCaseQuotedIdentifiers()` Retrieves whether this database treats mixed case quoted SQL identifiers as case insensitive and stores them in upper case.
`boolean`	DatabaseMetaData.`supportsAlterTableWithAddColumn()` Retrieves whether this database supports `ALTER TABLE` with add column.
`boolean`	DatabaseMetaData.`supportsAlterTableWithDropColumn()` Retrieves whether this database supports `ALTER TABLE` with drop column.
`boolean`	DatabaseMetaData.`supportsANSI92EntryLevelSQL()` Retrieves whether this database supports the ANSI92 entry level SQL grammar.
`boolean`	DatabaseMetaData.`supportsANSI92FullSQL()` Retrieves whether this database supports the ANSI92 full SQL grammar supported.
`boolean`	DatabaseMetaData.`supportsANSI92IntermediateSQL()` Retrieves whether this database supports the ANSI92 intermediate SQL grammar supported.
`boolean`	DatabaseMetaData.`supportsBatchUpdates()` Retrieves whether this database supports batch updates.
`boolean`	DatabaseMetaData.`supportsCatalogsInDataManipulation()` Retrieves whether a catalog name can be used in a data manipulation statement.
`boolean`	DatabaseMetaData.`supportsCatalogsInIndexDefinitions()` Retrieves whether a catalog name can be used in an index definition statement.
`boolean`	DatabaseMetaData.`supportsCatalogsInPrivilegeDefinitions()` Retrieves whether a catalog name can be used in a privilege definition statement.
`boolean`	DatabaseMetaData.`supportsCatalogsInProcedureCalls()` Retrieves whether a catalog name can be used in a procedure call statement.
`boolean`	DatabaseMetaData.`supportsCatalogsInTableDefinitions()` Retrieves whether a catalog name can be used in a table definition statement.
`boolean`	DatabaseMetaData.`supportsColumnAliasing()` Retrieves whether this database supports column aliasing.
`boolean`	DatabaseMetaData.`supportsConvert()` Retrieves whether this database supports the JDBC scalar function `CONVERT` for the conversion of one JDBC type to another.
`boolean`	DatabaseMetaData.`supportsConvert(int fromType, int toType)` Retrieves whether this database supports the JDBC scalar function `CONVERT` for conversions between the JDBC types fromType and toType.
`boolean`	DatabaseMetaData.`supportsCoreSQLGrammar()` Retrieves whether this database supports the ODBC Core SQL grammar.
`boolean`	DatabaseMetaData.`supportsCorrelatedSubqueries()` Retrieves whether this database supports correlated subqueries.
`boolean`	DatabaseMetaData.`supportsDataDefinitionAndDataManipulationTransactions()` Retrieves whether this database supports both data definition and data manipulation statements within a transaction.
`boolean`	DatabaseMetaData.`supportsDataManipulationTransactionsOnly()` Retrieves whether this database supports only data manipulation statements within a transaction.
`boolean`	DatabaseMetaData.`supportsDifferentTableCorrelationNames()` Retrieves whether, when table correlation names are supported, they are restricted to being different from the names of the tables.
`boolean`	DatabaseMetaData.`supportsExpressionsInOrderBy()` Retrieves whether this database supports expressions in `ORDER BY` lists.
`boolean`	DatabaseMetaData.`supportsExtendedSQLGrammar()` Retrieves whether this database supports the ODBC Extended SQL grammar.
`boolean`	DatabaseMetaData.`supportsFullOuterJoins()` Retrieves whether this database supports full nested outer joins.
`boolean`	DatabaseMetaData.`supportsGetGeneratedKeys()` Retrieves whether auto-generated keys can be retrieved after a statement has been executed
`boolean`	DatabaseMetaData.`supportsGroupBy()` Retrieves whether this database supports some form of `GROUP BY` clause.
`boolean`	DatabaseMetaData.`supportsGroupByBeyondSelect()` Retrieves whether this database supports using columns not included in the `SELECT` statement in a `GROUP BY` clause provided that all of the columns in the `SELECT` statement are included in the `GROUP BY` clause.
`boolean`	DatabaseMetaData.`supportsGroupByUnrelated()` Retrieves whether this database supports using a column that is not in the `SELECT` statement in a `GROUP BY` clause.
`boolean`	DatabaseMetaData.`supportsIntegrityEnhancementFacility()` Retrieves whether this database supports the SQL Integrity Enhancement Facility.
`boolean`	DatabaseMetaData.`supportsLikeEscapeClause()` Retrieves whether this database supports specifying a `LIKE` escape clause.
`boolean`	DatabaseMetaData.`supportsLimitedOuterJoins()` Retrieves whether this database provides limited support for outer joins.
`boolean`	DatabaseMetaData.`supportsMinimumSQLGrammar()` Retrieves whether this database supports the ODBC Minimum SQL grammar.
`boolean`	DatabaseMetaData.`supportsMixedCaseIdentifiers()` Retrieves whether this database treats mixed case unquoted SQL identifiers as case sensitive and as a result stores them in mixed case.
`boolean`	DatabaseMetaData.`supportsMixedCaseQuotedIdentifiers()` Retrieves whether this database treats mixed case quoted SQL identifiers as case sensitive and as a result stores them in mixed case.
`boolean`	DatabaseMetaData.`supportsMultipleOpenResults()` Retrieves whether it is possible to have multiple `ResultSet` objects returned from a `CallableStatement` object simultaneously.
`boolean`	DatabaseMetaData.`supportsMultipleResultSets()` Retrieves whether this database supports getting multiple `ResultSet` objects from a single call to the method `execute`.
`boolean`	DatabaseMetaData.`supportsMultipleTransactions()` Retrieves whether this database allows having multiple transactions open at once (on different connections).
`boolean`	DatabaseMetaData.`supportsNamedParameters()` Retrieves whether this database supports named parameters to callable statements.
`boolean`	DatabaseMetaData.`supportsNonNullableColumns()` Retrieves whether columns in this database may be defined as non-nullable.
`boolean`	DatabaseMetaData.`supportsOpenCursorsAcrossCommit()` Retrieves whether this database supports keeping cursors open across commits.
`boolean`	DatabaseMetaData.`supportsOpenCursorsAcrossRollback()` Retrieves whether this database supports keeping cursors open across rollbacks.
`boolean`	DatabaseMetaData.`supportsOpenStatementsAcrossCommit()` Retrieves whether this database supports keeping statements open across commits.
`boolean`	DatabaseMetaData.`supportsOpenStatementsAcrossRollback()` Retrieves whether this database supports keeping statements open across rollbacks.
`boolean`	DatabaseMetaData.`supportsOrderByUnrelated()` Retrieves whether this database supports using a column that is not in the `SELECT` statement in an `ORDER BY` clause.
`boolean`	DatabaseMetaData.`supportsOuterJoins()` Retrieves whether this database supports some form of outer join.
`boolean`	DatabaseMetaData.`supportsPositionedDelete()` Retrieves whether this database supports positioned `DELETE` statements.
`boolean`	DatabaseMetaData.`supportsPositionedUpdate()` Retrieves whether this database supports positioned `UPDATE` statements.
`default boolean`	DatabaseMetaData.`supportsRefCursors()` Retrieves whether this database supports REF CURSOR.
`boolean`	DatabaseMetaData.`supportsResultSetConcurrency(int type, int concurrency)` Retrieves whether this database supports the given concurrency type in combination with the given result set type.
`boolean`	DatabaseMetaData.`supportsResultSetHoldability(int holdability)` Retrieves whether this database supports the given result set holdability.
`boolean`	DatabaseMetaData.`supportsResultSetType(int type)` Retrieves whether this database supports the given result set type.
`boolean`	DatabaseMetaData.`supportsSavepoints()` Retrieves whether this database supports savepoints.
`boolean`	DatabaseMetaData.`supportsSchemasInDataManipulation()` Retrieves whether a schema name can be used in a data manipulation statement.
`boolean`	DatabaseMetaData.`supportsSchemasInIndexDefinitions()` Retrieves whether a schema name can be used in an index definition statement.
`boolean`	DatabaseMetaData.`supportsSchemasInPrivilegeDefinitions()` Retrieves whether a schema name can be used in a privilege definition statement.
`boolean`	DatabaseMetaData.`supportsSchemasInProcedureCalls()` Retrieves whether a schema name can be used in a procedure call statement.
`boolean`	DatabaseMetaData.`supportsSchemasInTableDefinitions()` Retrieves whether a schema name can be used in a table definition statement.
`boolean`	DatabaseMetaData.`supportsSelectForUpdate()` Retrieves whether this database supports `SELECT FOR UPDATE` statements.
`boolean`	DatabaseMetaData.`supportsStatementPooling()` Retrieves whether this database supports statement pooling.
`boolean`	DatabaseMetaData.`supportsStoredFunctionsUsingCallSyntax()` Retrieves whether this database supports invoking user-defined or vendor functions using the stored procedure escape syntax.
`boolean`	DatabaseMetaData.`supportsStoredProcedures()` Retrieves whether this database supports stored procedure calls that use the stored procedure escape syntax.
`boolean`	DatabaseMetaData.`supportsSubqueriesInComparisons()` Retrieves whether this database supports subqueries in comparison expressions.
`boolean`	DatabaseMetaData.`supportsSubqueriesInExists()` Retrieves whether this database supports subqueries in `EXISTS` expressions.
`boolean`	DatabaseMetaData.`supportsSubqueriesInIns()` Retrieves whether this database supports subqueries in `IN` expressions.
`boolean`	DatabaseMetaData.`supportsSubqueriesInQuantifieds()` Retrieves whether this database supports subqueries in quantified expressions.
`boolean`	DatabaseMetaData.`supportsTableCorrelationNames()` Retrieves whether this database supports table correlation names.
`boolean`	DatabaseMetaData.`supportsTransactionIsolationLevel(int level)` Retrieves whether this database supports the given transaction isolation level.
`boolean`	DatabaseMetaData.`supportsTransactions()` Retrieves whether this database supports transactions.
`boolean`	DatabaseMetaData.`supportsUnion()` Retrieves whether this database supports SQL `UNION`.
`boolean`	DatabaseMetaData.`supportsUnionAll()` Retrieves whether this database supports SQL `UNION ALL`.
`void`	Clob.`truncate(long len)` Truncates the `CLOB` value that this `Clob` designates to have a length of `len` characters.
`void`	Blob.`truncate(long len)` Truncates the `BLOB` value that this `Blob` object represents to be `len` bytes in length.
`<T> T`	Wrapper.`unwrap(Class<T> iface)` Returns an object that implements the given interface to allow access to non-standard methods, or standard methods not exposed by the proxy.
`void`	ResultSet.`updateArray(int columnIndex, Array x)` Updates the designated column with a `java.sql.Array` value.
`void`	ResultSet.`updateArray(String columnLabel, Array x)` Updates the designated column with a `java.sql.Array` value.
`void`	ResultSet.`updateAsciiStream(int columnIndex, InputStream x)` Updates the designated column with an ascii stream value.
`void`	ResultSet.`updateAsciiStream(int columnIndex, InputStream x, int length)` Updates the designated column with an ascii stream value, which will have the specified number of bytes.
`void`	ResultSet.`updateAsciiStream(int columnIndex, InputStream x, long length)` Updates the designated column with an ascii stream value, which will have the specified number of bytes.
`void`	ResultSet.`updateAsciiStream(String columnLabel, InputStream x)` Updates the designated column with an ascii stream value.
`void`	ResultSet.`updateAsciiStream(String columnLabel, InputStream x, int length)` Updates the designated column with an ascii stream value, which will have the specified number of bytes.
`void`	ResultSet.`updateAsciiStream(String columnLabel, InputStream x, long length)` Updates the designated column with an ascii stream value, which will have the specified number of bytes.
`void`	ResultSet.`updateBigDecimal(int columnIndex, BigDecimal x)` Updates the designated column with a `java.math.BigDecimal` value.
`void`	ResultSet.`updateBigDecimal(String columnLabel, BigDecimal x)` Updates the designated column with a `java.sql.BigDecimal` value.
`void`	ResultSet.`updateBinaryStream(int columnIndex, InputStream x)` Updates the designated column with a binary stream value.
`void`	ResultSet.`updateBinaryStream(int columnIndex, InputStream x, int length)` Updates the designated column with a binary stream value, which will have the specified number of bytes.
`void`	ResultSet.`updateBinaryStream(int columnIndex, InputStream x, long length)` Updates the designated column with a binary stream value, which will have the specified number of bytes.
`void`	ResultSet.`updateBinaryStream(String columnLabel, InputStream x)` Updates the designated column with a binary stream value.
`void`	ResultSet.`updateBinaryStream(String columnLabel, InputStream x, int length)` Updates the designated column with a binary stream value, which will have the specified number of bytes.
`void`	ResultSet.`updateBinaryStream(String columnLabel, InputStream x, long length)` Updates the designated column with a binary stream value, which will have the specified number of bytes.
`void`	ResultSet.`updateBlob(int columnIndex, Blob x)` Updates the designated column with a `java.sql.Blob` value.
`void`	ResultSet.`updateBlob(int columnIndex, InputStream inputStream)` Updates the designated column using the given input stream.
`void`	ResultSet.`updateBlob(int columnIndex, InputStream inputStream, long length)` Updates the designated column using the given input stream, which will have the specified number of bytes.
`void`	ResultSet.`updateBlob(String columnLabel, Blob x)` Updates the designated column with a `java.sql.Blob` value.
`void`	ResultSet.`updateBlob(String columnLabel, InputStream inputStream)` Updates the designated column using the given input stream.
`void`	ResultSet.`updateBlob(String columnLabel, InputStream inputStream, long length)` Updates the designated column using the given input stream, which will have the specified number of bytes.
`void`	ResultSet.`updateBoolean(int columnIndex, boolean x)` Updates the designated column with a `boolean` value.
`void`	ResultSet.`updateBoolean(String columnLabel, boolean x)` Updates the designated column with a `boolean` value.
`void`	ResultSet.`updateByte(int columnIndex, byte x)` Updates the designated column with a `byte` value.
`void`	ResultSet.`updateByte(String columnLabel, byte x)` Updates the designated column with a `byte` value.
`void`	ResultSet.`updateBytes(int columnIndex, byte[] x)` Updates the designated column with a `byte` array value.
`void`	ResultSet.`updateBytes(String columnLabel, byte[] x)` Updates the designated column with a byte array value.
`void`	ResultSet.`updateCharacterStream(int columnIndex, Reader x)` Updates the designated column with a character stream value.
`void`	ResultSet.`updateCharacterStream(int columnIndex, Reader x, int length)` Updates the designated column with a character stream value, which will have the specified number of bytes.
`void`	ResultSet.`updateCharacterStream(int columnIndex, Reader x, long length)` Updates the designated column with a character stream value, which will have the specified number of bytes.
`void`	ResultSet.`updateCharacterStream(String columnLabel, Reader reader)` Updates the designated column with a character stream value.
`void`	ResultSet.`updateCharacterStream(String columnLabel, Reader reader, int length)` Updates the designated column with a character stream value, which will have the specified number of bytes.
`void`	ResultSet.`updateCharacterStream(String columnLabel, Reader reader, long length)` Updates the designated column with a character stream value, which will have the specified number of bytes.
`void`	ResultSet.`updateClob(int columnIndex, Clob x)` Updates the designated column with a `java.sql.Clob` value.
`void`	ResultSet.`updateClob(int columnIndex, Reader reader)` Updates the designated column using the given `Reader` object.
`void`	ResultSet.`updateClob(int columnIndex, Reader reader, long length)` Updates the designated column using the given `Reader` object, which is the given number of characters long.
`void`	ResultSet.`updateClob(String columnLabel, Clob x)` Updates the designated column with a `java.sql.Clob` value.
`void`	ResultSet.`updateClob(String columnLabel, Reader reader)` Updates the designated column using the given `Reader` object.
`void`	ResultSet.`updateClob(String columnLabel, Reader reader, long length)` Updates the designated column using the given `Reader` object, which is the given number of characters long.
`void`	ResultSet.`updateDate(int columnIndex, Date x)` Updates the designated column with a `java.sql.Date` value.
`void`	ResultSet.`updateDate(String columnLabel, Date x)` Updates the designated column with a `java.sql.Date` value.
`void`	ResultSet.`updateDouble(int columnIndex, double x)` Updates the designated column with a `double` value.
`void`	ResultSet.`updateDouble(String columnLabel, double x)` Updates the designated column with a `double` value.
`void`	ResultSet.`updateFloat(int columnIndex, float x)` Updates the designated column with a `float` value.
`void`	ResultSet.`updateFloat(String columnLabel, float x)` Updates the designated column with a `float` value.
`void`	ResultSet.`updateInt(int columnIndex, int x)` Updates the designated column with an `int` value.
`void`	ResultSet.`updateInt(String columnLabel, int x)` Updates the designated column with an `int` value.
`void`	ResultSet.`updateLong(int columnIndex, long x)` Updates the designated column with a `long` value.
`void`	ResultSet.`updateLong(String columnLabel, long x)` Updates the designated column with a `long` value.
`void`	ResultSet.`updateNCharacterStream(int columnIndex, Reader x)` Updates the designated column with a character stream value.
`void`	ResultSet.`updateNCharacterStream(int columnIndex, Reader x, long length)` Updates the designated column with a character stream value, which will have the specified number of bytes.
`void`	ResultSet.`updateNCharacterStream(String columnLabel, Reader reader)` Updates the designated column with a character stream value.
`void`	ResultSet.`updateNCharacterStream(String columnLabel, Reader reader, long length)` Updates the designated column with a character stream value, which will have the specified number of bytes.
`void`	ResultSet.`updateNClob(int columnIndex, NClob nClob)` Updates the designated column with a `java.sql.NClob` value.
`void`	ResultSet.`updateNClob(int columnIndex, Reader reader)` Updates the designated column using the given `Reader` The data will be read from the stream as needed until end-of-stream is reached.
`void`	ResultSet.`updateNClob(int columnIndex, Reader reader, long length)` Updates the designated column using the given `Reader` object, which is the given number of characters long.
`void`	ResultSet.`updateNClob(String columnLabel, NClob nClob)` Updates the designated column with a `java.sql.NClob` value.
`void`	ResultSet.`updateNClob(String columnLabel, Reader reader)` Updates the designated column using the given `Reader` object.
`void`	ResultSet.`updateNClob(String columnLabel, Reader reader, long length)` Updates the designated column using the given `Reader` object, which is the given number of characters long.
`void`	ResultSet.`updateNString(int columnIndex, String nString)` Updates the designated column with a `String` value.
`void`	ResultSet.`updateNString(String columnLabel, String nString)` Updates the designated column with a `String` value.
`void`	ResultSet.`updateNull(int columnIndex)` Updates the designated column with a `null` value.
`void`	ResultSet.`updateNull(String columnLabel)` Updates the designated column with a `null` value.
`void`	ResultSet.`updateObject(int columnIndex, Object x)` Updates the designated column with an `Object` value.
`void`	ResultSet.`updateObject(int columnIndex, Object x, int scaleOrLength)` Updates the designated column with an `Object` value.
`default void`	ResultSet.`updateObject(int columnIndex, Object x, SQLType targetSqlType)` Updates the designated column with an `Object` value.
`default void`	ResultSet.`updateObject(int columnIndex, Object x, SQLType targetSqlType, int scaleOrLength)` Updates the designated column with an `Object` value.
`void`	ResultSet.`updateObject(String columnLabel, Object x)` Updates the designated column with an `Object` value.
`void`	ResultSet.`updateObject(String columnLabel, Object x, int scaleOrLength)` Updates the designated column with an `Object` value.
`default void`	ResultSet.`updateObject(String columnLabel, Object x, SQLType targetSqlType)` Updates the designated column with an `Object` value.
`default void`	ResultSet.`updateObject(String columnLabel, Object x, SQLType targetSqlType, int scaleOrLength)` Updates the designated column with an `Object` value.
`void`	ResultSet.`updateRef(int columnIndex, Ref x)` Updates the designated column with a `java.sql.Ref` value.
`void`	ResultSet.`updateRef(String columnLabel, Ref x)` Updates the designated column with a `java.sql.Ref` value.
`void`	ResultSet.`updateRow()` Updates the underlying database with the new contents of the current row of this `ResultSet` object.
`void`	ResultSet.`updateRowId(int columnIndex, RowId x)` Updates the designated column with a `RowId` value.
`void`	ResultSet.`updateRowId(String columnLabel, RowId x)` Updates the designated column with a `RowId` value.
`boolean`	DatabaseMetaData.`updatesAreDetected(int type)` Retrieves whether or not a visible row update can be detected by calling the method `ResultSet.rowUpdated`.
`void`	ResultSet.`updateShort(int columnIndex, short x)` Updates the designated column with a `short` value.
`void`	ResultSet.`updateShort(String columnLabel, short x)` Updates the designated column with a `short` value.
`void`	ResultSet.`updateSQLXML(int columnIndex, SQLXML xmlObject)` Updates the designated column with a `java.sql.SQLXML` value.
`void`	ResultSet.`updateSQLXML(String columnLabel, SQLXML xmlObject)` Updates the designated column with a `java.sql.SQLXML` value.
`void`	ResultSet.`updateString(int columnIndex, String x)` Updates the designated column with a `String` value.
`void`	ResultSet.`updateString(String columnLabel, String x)` Updates the designated column with a `String` value.
`void`	ResultSet.`updateTime(int columnIndex, Time x)` Updates the designated column with a `java.sql.Time` value.
`void`	ResultSet.`updateTime(String columnLabel, Time x)` Updates the designated column with a `java.sql.Time` value.
`void`	ResultSet.`updateTimestamp(int columnIndex, Timestamp x)` Updates the designated column with a `java.sql.Timestamp` value.
`void`	ResultSet.`updateTimestamp(String columnLabel, Timestamp x)` Updates the designated column with a `java.sql.Timestamp` value.
`boolean`	DatabaseMetaData.`usesLocalFilePerTable()` Retrieves whether this database uses a file for each table.
`boolean`	DatabaseMetaData.`usesLocalFiles()` Retrieves whether this database stores tables in a local file.
`boolean`	CallableStatement.`wasNull()` Retrieves whether the last OUT parameter read had the value of SQL `NULL`.
`boolean`	SQLInput.`wasNull()` Retrieves whether the last value read was SQL `NULL`.
`boolean`	ResultSet.`wasNull()` Reports whether the last column read had a value of SQL `NULL`.
`void`	SQLOutput.`writeArray(Array x)` Writes an SQL `ARRAY` value to the stream.
`void`	SQLOutput.`writeAsciiStream(InputStream x)` Writes the next attribute to the stream as a stream of ASCII characters.
`void`	SQLOutput.`writeBigDecimal(BigDecimal x)` Writes the next attribute to the stream as a java.math.BigDecimal object.
`void`	SQLOutput.`writeBinaryStream(InputStream x)` Writes the next attribute to the stream as a stream of uninterpreted bytes.
`void`	SQLOutput.`writeBlob(Blob x)` Writes an SQL `BLOB` value to the stream.
`void`	SQLOutput.`writeBoolean(boolean x)` Writes the next attribute to the stream as a Java boolean.
`void`	SQLOutput.`writeByte(byte x)` Writes the next attribute to the stream as a Java byte.
`void`	SQLOutput.`writeBytes(byte[] x)` Writes the next attribute to the stream as an array of bytes.
`void`	SQLOutput.`writeCharacterStream(Reader x)` Writes the next attribute to the stream as a stream of Unicode characters.
`void`	SQLOutput.`writeClob(Clob x)` Writes an SQL `CLOB` value to the stream.
`void`	SQLOutput.`writeDate(Date x)` Writes the next attribute to the stream as a java.sql.Date object.
`void`	SQLOutput.`writeDouble(double x)` Writes the next attribute to the stream as a Java double.
`void`	SQLOutput.`writeFloat(float x)` Writes the next attribute to the stream as a Java float.
`void`	SQLOutput.`writeInt(int x)` Writes the next attribute to the stream as a Java int.
`void`	SQLOutput.`writeLong(long x)` Writes the next attribute to the stream as a Java long.
`void`	SQLOutput.`writeNClob(NClob x)` Writes an SQL `NCLOB` value to the stream.
`void`	SQLOutput.`writeNString(String x)` Writes the next attribute to the stream as a `String` in the Java programming language.
`default void`	SQLOutput.`writeObject(Object x, SQLType targetSqlType)` Writes to the stream the data contained in the given object.
`void`	SQLOutput.`writeObject(SQLData x)` Writes to the stream the data contained in the given `SQLData` object.
`void`	SQLOutput.`writeRef(Ref x)` Writes an SQL `REF` value to the stream.
`void`	SQLOutput.`writeRowId(RowId x)` Writes an SQL `ROWID` value to the stream.
`void`	SQLOutput.`writeShort(short x)` Writes the next attribute to the stream as a Java short.
`void`	SQLData.`writeSQL(SQLOutput stream)` Writes this object to the given SQL data stream, converting it back to its SQL value in the data source.
`void`	SQLOutput.`writeSQLXML(SQLXML x)` Writes an SQL `XML` value to the stream.
`void`	SQLOutput.`writeString(String x)` Writes the next attribute to the stream as a `String` in the Java programming language.
`void`	SQLOutput.`writeStruct(Struct x)` Writes an SQL structured type value to the stream.
`void`	SQLOutput.`writeTime(Time x)` Writes the next attribute to the stream as a java.sql.Time object.
`void`	SQLOutput.`writeTimestamp(Timestamp x)` Writes the next attribute to the stream as a java.sql.Timestamp object.
`void`	SQLOutput.`writeURL(URL x)` Writes a SQL `DATALINK` value to the stream.

Uses of SQLException in javax.sql

Methods in javax.sql that return SQLException
Modifier and Type	Method and Description
`SQLException`	ConnectionEvent.`getSQLException()` Retrieves the `SQLException` for this `ConnectionEvent` object.
`SQLException`	StatementEvent.`getSQLException()` Returns the `SQLException` the driver is about to throw

Methods in javax.sql that throw SQLException
Modifier and Type	Method and Description
`void`	RowSet.`clearParameters()` Clears the parameters set for this `RowSet` object's command.
`void`	PooledConnection.`close()` Closes the physical connection that this `PooledConnection` object represents.
`void`	RowSet.`execute()` Fills this `RowSet` object with data.
`Connection`	RowSetInternal.`getConnection()` Retrieves the `Connection` object that was passed to this `RowSet` object.
`Connection`	PooledConnection.`getConnection()` Creates and returns a `Connection` object that is a handle for the physical connection that this `PooledConnection` object represents.
`Connection`	DataSource.`getConnection()` Attempts to establish a connection with the data source that this `DataSource` object represents.
`Connection`	DataSource.`getConnection(String username, String password)` Attempts to establish a connection with the data source that this `DataSource` object represents.
`boolean`	RowSet.`getEscapeProcessing()` Retrieves whether escape processing is enabled for this `RowSet` object.
`int`	CommonDataSource.`getLoginTimeout()` Gets the maximum time in seconds that this data source can wait while attempting to connect to a database.
`PrintWriter`	CommonDataSource.`getLogWriter()` Retrieves the log writer for this `DataSource` object.
`int`	RowSet.`getMaxFieldSize()` Retrieves the maximum number of bytes that may be returned for certain column values.
`int`	RowSet.`getMaxRows()` Retrieves the maximum number of rows that this `RowSet` object can contain.
`ResultSet`	RowSetInternal.`getOriginal()` Retrieves a `ResultSet` object containing the original value of this `RowSet` object.
`ResultSet`	RowSetInternal.`getOriginalRow()` Retrieves a `ResultSet` object containing the original value of the current row only.
`Object[]`	RowSetInternal.`getParams()` Retrieves the parameters that have been set for this `RowSet` object's command.
`PooledConnection`	ConnectionPoolDataSource.`getPooledConnection()` Attempts to establish a physical database connection that can be used as a pooled connection.
`PooledConnection`	ConnectionPoolDataSource.`getPooledConnection(String user, String password)` Attempts to establish a physical database connection that can be used as a pooled connection.
`int`	RowSet.`getQueryTimeout()` Retrieves the maximum number of seconds the driver will wait for a statement to execute.
`Map<String,Class<?>>`	RowSet.`getTypeMap()` Retrieves the `Map` object associated with this `RowSet` object, which specifies the custom mapping of SQL user-defined types, if any.
`String`	RowSet.`getUrl()` Retrieves the url property this `RowSet` object will use to create a connection if it uses the `DriverManager` instead of a `DataSource` object to establish the connection.
`XAConnection`	XADataSource.`getXAConnection()` Attempts to establish a physical database connection that can be used in a distributed transaction.
`XAConnection`	XADataSource.`getXAConnection(String user, String password)` Attempts to establish a physical database connection, using the given user name and password.
`XAResource`	XAConnection.`getXAResource()` Retrieves an `XAResource` object that the transaction manager will use to manage this `XAConnection` object's participation in a distributed transaction.
`void`	RowSetReader.`readData(RowSetInternal caller)` Reads the new contents of the calling `RowSet` object.
`void`	RowSet.`setArray(int i, Array x)` Sets the designated parameter in this `RowSet` object's command with the given `Array` value.
`void`	RowSet.`setAsciiStream(int parameterIndex, InputStream x)` Sets the designated parameter in this `RowSet` object's command to the given input stream.
`void`	RowSet.`setAsciiStream(int parameterIndex, InputStream x, int length)` Sets the designated parameter in this `RowSet` object's command to the given `java.io.InputStream` value.
`void`	RowSet.`setAsciiStream(String parameterName, InputStream x)` Sets the designated parameter to the given input stream.
`void`	RowSet.`setAsciiStream(String parameterName, InputStream x, int length)` Sets the designated parameter to the given input stream, which will have the specified number of bytes.
`void`	RowSetMetaData.`setAutoIncrement(int columnIndex, boolean property)` Sets whether the designated column is automatically numbered, The default is for a `RowSet` object's columns not to be automatically numbered.
`void`	RowSet.`setBigDecimal(int parameterIndex, BigDecimal x)` Sets the designated parameter in this `RowSet` object's command to the given `java.math.BigDeciaml` value.
`void`	RowSet.`setBigDecimal(String parameterName, BigDecimal x)` Sets the designated parameter to the given `java.math.BigDecimal` value.
`void`	RowSet.`setBinaryStream(int parameterIndex, InputStream x)` Sets the designated parameter in this `RowSet` object's command to the given input stream.
`void`	RowSet.`setBinaryStream(int parameterIndex, InputStream x, int length)` Sets the designated parameter in this `RowSet` object's command to the given `java.io.InputStream` value.
`void`	RowSet.`setBinaryStream(String parameterName, InputStream x)` Sets the designated parameter to the given input stream.
`void`	RowSet.`setBinaryStream(String parameterName, InputStream x, int length)` Sets the designated parameter to the given input stream, which will have the specified number of bytes.
`void`	RowSet.`setBlob(int i, Blob x)` Sets the designated parameter in this `RowSet` object's command with the given `Blob` value.
`void`	RowSet.`setBlob(int parameterIndex, InputStream inputStream)` Sets the designated parameter to a `InputStream` object.
`void`	RowSet.`setBlob(int parameterIndex, InputStream inputStream, long length)` Sets the designated parameter to a `InputStream` object.
`void`	RowSet.`setBlob(String parameterName, Blob x)` Sets the designated parameter to the given `java.sql.Blob` object.
`void`	RowSet.`setBlob(String parameterName, InputStream inputStream)` Sets the designated parameter to a `InputStream` object.
`void`	RowSet.`setBlob(String parameterName, InputStream inputStream, long length)` Sets the designated parameter to a `InputStream` object.
`void`	RowSet.`setBoolean(int parameterIndex, boolean x)` Sets the designated parameter in this `RowSet` object's command to the given Java `boolean` value.
`void`	RowSet.`setBoolean(String parameterName, boolean x)` Sets the designated parameter to the given Java `boolean` value.
`void`	RowSet.`setByte(int parameterIndex, byte x)` Sets the designated parameter in this `RowSet` object's command to the given Java `byte` value.
`void`	RowSet.`setByte(String parameterName, byte x)` Sets the designated parameter to the given Java `byte` value.
`void`	RowSet.`setBytes(int parameterIndex, byte[] x)` Sets the designated parameter in this `RowSet` object's command to the given Java array of `byte` values.
`void`	RowSet.`setBytes(String parameterName, byte[] x)` Sets the designated parameter to the given Java array of bytes.
`void`	RowSetMetaData.`setCaseSensitive(int columnIndex, boolean property)` Sets whether the designated column is case sensitive.
`void`	RowSetMetaData.`setCatalogName(int columnIndex, String catalogName)` Sets the designated column's table's catalog name, if any, to the given `String`.
`void`	RowSet.`setCharacterStream(int parameterIndex, Reader reader)` Sets the designated parameter in this `RowSet` object's command to the given `Reader` object.
`void`	RowSet.`setCharacterStream(int parameterIndex, Reader reader, int length)` Sets the designated parameter in this `RowSet` object's command to the given `java.io.Reader` value.
`void`	RowSet.`setCharacterStream(String parameterName, Reader reader)` Sets the designated parameter to the given `Reader` object.
`void`	RowSet.`setCharacterStream(String parameterName, Reader reader, int length)` Sets the designated parameter to the given `Reader` object, which is the given number of characters long.
`void`	RowSet.`setClob(int i, Clob x)` Sets the designated parameter in this `RowSet` object's command with the given `Clob` value.
`void`	RowSet.`setClob(int parameterIndex, Reader reader)` Sets the designated parameter to a `Reader` object.
`void`	RowSet.`setClob(int parameterIndex, Reader reader, long length)` Sets the designated parameter to a `Reader` object.
`void`	RowSet.`setClob(String parameterName, Clob x)` Sets the designated parameter to the given `java.sql.Clob` object.
`void`	RowSet.`setClob(String parameterName, Reader reader)` Sets the designated parameter to a `Reader` object.
`void`	RowSet.`setClob(String parameterName, Reader reader, long length)` Sets the designated parameter to a `Reader` object.
`void`	RowSetMetaData.`setColumnCount(int columnCount)` Sets the number of columns in the `RowSet` object to the given number.
`void`	RowSetMetaData.`setColumnDisplaySize(int columnIndex, int size)` Sets the designated column's normal maximum width in chars to the given `int`.
`void`	RowSetMetaData.`setColumnLabel(int columnIndex, String label)` Sets the suggested column title for use in printouts and displays, if any, to the given `String`.
`void`	RowSetMetaData.`setColumnName(int columnIndex, String columnName)` Sets the name of the designated column to the given `String`.
`void`	RowSetMetaData.`setColumnType(int columnIndex, int SQLType)` Sets the designated column's SQL type to the one given.
`void`	RowSetMetaData.`setColumnTypeName(int columnIndex, String typeName)` Sets the designated column's type name that is specific to the data source, if any, to the given `String`.
`void`	RowSet.`setCommand(String cmd)` Sets this `RowSet` object's command property to the given SQL query.
`void`	RowSet.`setConcurrency(int concurrency)` Sets the concurrency of this `RowSet` object to the given concurrency level.
`void`	RowSetMetaData.`setCurrency(int columnIndex, boolean property)` Sets whether the designated column is a cash value.
`void`	RowSet.`setDataSourceName(String name)` Sets the data source name property for this `RowSet` object to the given `String`.
`void`	RowSet.`setDate(int parameterIndex, Date x)` Sets the designated parameter in this `RowSet` object's command to the given `java.sql.Date` value.
`void`	RowSet.`setDate(int parameterIndex, Date x, Calendar cal)` Sets the designated parameter in this `RowSet` object's command with the given `java.sql.Date` value.
`void`	RowSet.`setDate(String parameterName, Date x)` Sets the designated parameter to the given `java.sql.Date` value using the default time zone of the virtual machine that is running the application.
`void`	RowSet.`setDate(String parameterName, Date x, Calendar cal)` Sets the designated parameter to the given `java.sql.Date` value, using the given `Calendar` object.
`void`	RowSet.`setDouble(int parameterIndex, double x)` Sets the designated parameter in this `RowSet` object's command to the given Java `double` value.
`void`	RowSet.`setDouble(String parameterName, double x)` Sets the designated parameter to the given Java `double` value.
`void`	RowSet.`setEscapeProcessing(boolean enable)` Sets escape processing for this `RowSet` object on or off.
`void`	RowSet.`setFloat(int parameterIndex, float x)` Sets the designated parameter in this `RowSet` object's command to the given Java `float` value.
`void`	RowSet.`setFloat(String parameterName, float x)` Sets the designated parameter to the given Java `float` value.
`void`	RowSet.`setInt(int parameterIndex, int x)` Sets the designated parameter in this `RowSet` object's command to the given Java `int` value.
`void`	RowSet.`setInt(String parameterName, int x)` Sets the designated parameter to the given Java `int` value.
`void`	CommonDataSource.`setLoginTimeout(int seconds)` Sets the maximum time in seconds that this data source will wait while attempting to connect to a database.
`void`	CommonDataSource.`setLogWriter(PrintWriter out)` Sets the log writer for this `DataSource` object to the given `java.io.PrintWriter` object.
`void`	RowSet.`setLong(int parameterIndex, long x)` Sets the designated parameter in this `RowSet` object's command to the given Java `long` value.
`void`	RowSet.`setLong(String parameterName, long x)` Sets the designated parameter to the given Java `long` value.
`void`	RowSet.`setMaxFieldSize(int max)` Sets the maximum number of bytes that can be returned for a column value to the given number of bytes.
`void`	RowSet.`setMaxRows(int max)` Sets the maximum number of rows that this `RowSet` object can contain to the specified number.
`void`	RowSetInternal.`setMetaData(RowSetMetaData md)` Sets the given `RowSetMetaData` object as the `RowSetMetaData` object for this `RowSet` object.
`void`	RowSet.`setNCharacterStream(int parameterIndex, Reader value)` Sets the designated parameter in this `RowSet` object's command to a `Reader` object.
`void`	RowSet.`setNCharacterStream(int parameterIndex, Reader value, long length)` Sets the designated parameter to a `Reader` object.
`void`	RowSet.`setNCharacterStream(String parameterName, Reader value)` Sets the designated parameter to a `Reader` object.
`void`	RowSet.`setNCharacterStream(String parameterName, Reader value, long length)` Sets the designated parameter to a `Reader` object.
`void`	RowSet.`setNClob(int parameterIndex, NClob value)` Sets the designated parameter to a `java.sql.NClob` object.
`void`	RowSet.`setNClob(int parameterIndex, Reader reader)` Sets the designated parameter to a `Reader` object.
`void`	RowSet.`setNClob(int parameterIndex, Reader reader, long length)` Sets the designated parameter to a `Reader` object.
`void`	RowSet.`setNClob(String parameterName, NClob value)` Sets the designated parameter to a `java.sql.NClob` object.
`void`	RowSet.`setNClob(String parameterName, Reader reader)` Sets the designated parameter to a `Reader` object.
`void`	RowSet.`setNClob(String parameterName, Reader reader, long length)` Sets the designated parameter to a `Reader` object.
`void`	RowSet.`setNString(int parameterIndex, String value)` Sets the designated parameter to the given `String` object.
`void`	RowSet.`setNString(String parameterName, String value)` Sets the designated parameter to the given `String` object.
`void`	RowSet.`setNull(int parameterIndex, int sqlType)` Sets the designated parameter in this `RowSet` object's SQL command to SQL `NULL`.
`void`	RowSet.`setNull(int paramIndex, int sqlType, String typeName)` Sets the designated parameter in this `RowSet` object's SQL command to SQL `NULL`.
`void`	RowSet.`setNull(String parameterName, int sqlType)` Sets the designated parameter to SQL `NULL`.
`void`	RowSet.`setNull(String parameterName, int sqlType, String typeName)` Sets the designated parameter to SQL `NULL`.
`void`	RowSetMetaData.`setNullable(int columnIndex, int property)` Sets whether the designated column's value can be set to `NULL`.
`void`	RowSet.`setObject(int parameterIndex, Object x)` Sets the designated parameter in this `RowSet` object's command with a Java `Object`.
`void`	RowSet.`setObject(int parameterIndex, Object x, int targetSqlType)` Sets the designated parameter in this `RowSet` object's command with a Java `Object`.
`void`	RowSet.`setObject(int parameterIndex, Object x, int targetSqlType, int scaleOrLength)` Sets the designated parameter in this `RowSet` object's command with the given Java `Object`.
`void`	RowSet.`setObject(String parameterName, Object x)` Sets the value of the designated parameter with the given object.
`void`	RowSet.`setObject(String parameterName, Object x, int targetSqlType)` Sets the value of the designated parameter with the given object.
`void`	RowSet.`setObject(String parameterName, Object x, int targetSqlType, int scale)` Sets the value of the designated parameter with the given object.
`void`	RowSet.`setPassword(String password)` Sets the database password for this `RowSet` object to the given `String`.
`void`	RowSetMetaData.`setPrecision(int columnIndex, int precision)` Sets the designated column's number of decimal digits to the given `int`.
`void`	RowSet.`setQueryTimeout(int seconds)` Sets the maximum time the driver will wait for a statement to execute to the given number of seconds.
`void`	RowSet.`setReadOnly(boolean value)` Sets whether this `RowSet` object is read-only to the given `boolean`.
`void`	RowSet.`setRef(int i, Ref x)` Sets the designated parameter in this `RowSet` object's command with the given `Ref` value.
`void`	RowSet.`setRowId(int parameterIndex, RowId x)` Sets the designated parameter to the given `java.sql.RowId` object.
`void`	RowSet.`setRowId(String parameterName, RowId x)` Sets the designated parameter to the given `java.sql.RowId` object.
`void`	RowSetMetaData.`setScale(int columnIndex, int scale)` Sets the designated column's number of digits to the right of the decimal point to the given `int`.
`void`	RowSetMetaData.`setSchemaName(int columnIndex, String schemaName)` Sets the name of the designated column's table's schema, if any, to the given `String`.
`void`	RowSetMetaData.`setSearchable(int columnIndex, boolean property)` Sets whether the designated column can be used in a where clause.
`void`	RowSet.`setShort(int parameterIndex, short x)` Sets the designated parameter in this `RowSet` object's command to the given Java `short` value.
`void`	RowSet.`setShort(String parameterName, short x)` Sets the designated parameter to the given Java `short` value.
`void`	RowSetMetaData.`setSigned(int columnIndex, boolean property)` Sets whether the designated column is a signed number.
`void`	RowSet.`setSQLXML(int parameterIndex, SQLXML xmlObject)` Sets the designated parameter to the given `java.sql.SQLXML` object.
`void`	RowSet.`setSQLXML(String parameterName, SQLXML xmlObject)` Sets the designated parameter to the given `java.sql.SQLXML` object.
`void`	RowSet.`setString(int parameterIndex, String x)` Sets the designated parameter in this `RowSet` object's command to the given Java `String` value.
`void`	RowSet.`setString(String parameterName, String x)` Sets the designated parameter to the given Java `String` value.
`void`	RowSetMetaData.`setTableName(int columnIndex, String tableName)` Sets the designated column's table name, if any, to the given `String`.
`void`	RowSet.`setTime(int parameterIndex, Time x)` Sets the designated parameter in this `RowSet` object's command to the given `java.sql.Time` value.
`void`	RowSet.`setTime(int parameterIndex, Time x, Calendar cal)` Sets the designated parameter in this `RowSet` object's command with the given `java.sql.Time` value.
`void`	RowSet.`setTime(String parameterName, Time x)` Sets the designated parameter to the given `java.sql.Time` value.
`void`	RowSet.`setTime(String parameterName, Time x, Calendar cal)` Sets the designated parameter to the given `java.sql.Time` value, using the given `Calendar` object.
`void`	RowSet.`setTimestamp(int parameterIndex, Timestamp x)` Sets the designated parameter in this `RowSet` object's command to the given `java.sql.Timestamp` value.
`void`	RowSet.`setTimestamp(int parameterIndex, Timestamp x, Calendar cal)` Sets the designated parameter in this `RowSet` object's command with the given `java.sql.Timestamp` value.
`void`	RowSet.`setTimestamp(String parameterName, Timestamp x)` Sets the designated parameter to the given `java.sql.Timestamp` value.
`void`	RowSet.`setTimestamp(String parameterName, Timestamp x, Calendar cal)` Sets the designated parameter to the given `java.sql.Timestamp` value, using the given `Calendar` object.
`void`	RowSet.`setTransactionIsolation(int level)` Sets the transaction isolation level for this `RowSet` object.
`void`	RowSet.`setType(int type)` Sets the type of this `RowSet` object to the given type.
`void`	RowSet.`setTypeMap(Map<String,Class<?>> map)` Installs the given `java.util.Map` object as the default type map for this `RowSet` object.
`void`	RowSet.`setURL(int parameterIndex, URL x)` Sets the designated parameter to the given `java.net.URL` value.
`void`	RowSet.`setUrl(String url)` Sets the URL this `RowSet` object will use when it uses the `DriverManager` to create a connection.
`void`	RowSet.`setUsername(String name)` Sets the username property for this `RowSet` object to the given `String`.
`boolean`	RowSetWriter.`writeData(RowSetInternal caller)` Writes the changes in this `RowSetWriter` object's rowset back to the data source from which it got its data.

Constructors in javax.sql with parameters of type SQLException
Constructor and Description
`ConnectionEvent(PooledConnection con, SQLException ex)` Constructs a `ConnectionEvent` object initialized with the given `PooledConnection` object and `SQLException` object.
`StatementEvent(PooledConnection con, PreparedStatement statement, SQLException exception)` Constructs a `StatementEvent` with the specified `PooledConnection`, `PreparedStatement` and `SQLException`

Uses of SQLException in javax.sql.rowset

Subclasses of SQLException in javax.sql.rowset
Modifier and Type	Class and Description
`class`	`RowSetWarning` An extension of `SQLException` that provides information about database warnings set on `RowSet` objects.

Methods in javax.sql.rowset that throw SQLException
Modifier and Type	Method and Description
`void`	JoinRowSet.`addRowSet(Joinable rowset)` Adds the given `RowSet` object to this `JoinRowSet` object.
`void`	JoinRowSet.`addRowSet(RowSet[] rowset, int[] columnIdx)` Adds one or more `RowSet` objects contained in the given array of `RowSet` objects to this `JoinRowSet` object and sets the match column for each of the `RowSet` objects to the match columns in the given array of column indexes.
`void`	JoinRowSet.`addRowSet(RowSet[] rowset, String[] columnName)` Adds one or more `RowSet` objects contained in the given array of `RowSet` objects to this `JoinRowSet` object and sets the match column for each of the `RowSet` objects to the match columns in the given array of column names.
`void`	JoinRowSet.`addRowSet(RowSet rowset, int columnIdx)` Adds the given `RowSet` object to this `JoinRowSet` object and sets the designated column as the match column for the `RowSet` object.
`void`	JoinRowSet.`addRowSet(RowSet rowset, String columnName)` Adds rowset to this `JoinRowSet` object and sets the designated column as the match column.
`void`	BaseRowSet.`clearParameters()` Clears all of the current parameter values in this `RowSet` object's internal representation of the parameters to be set in this `RowSet` object's command when it is executed.
`boolean`	CachedRowSet.`columnUpdated(int idx)` Indicates whether the designated column in the current row of this `CachedRowSet` object has been updated.
`boolean`	CachedRowSet.`columnUpdated(String columnName)` Indicates whether the designated column in the current row of this `CachedRowSet` object has been updated.
`void`	JdbcRowSet.`commit()` Each `JdbcRowSet` contains a `Connection` object from the `ResultSet` or JDBC properties passed to it's constructors.
`void`	CachedRowSet.`commit()` Each `CachedRowSet` object's `SyncProvider` contains a `Connection` object from the `ResultSet` or JDBC properties passed to it's constructors.
`CachedRowSet`	RowSetFactory.`createCachedRowSet()` Creates a new instance of a CachedRowSet.
`CachedRowSet`	CachedRowSet.`createCopy()` Creates a `RowSet` object that is a deep copy of the data in this `CachedRowSet` object.
`CachedRowSet`	CachedRowSet.`createCopyNoConstraints()` Creates a `CachedRowSet` object that is a deep copy of this `CachedRowSet` object's data but is independent of it.
`CachedRowSet`	CachedRowSet.`createCopySchema()` Creates a `CachedRowSet` object that is an empty copy of this `CachedRowSet` object.
`FilteredRowSet`	RowSetFactory.`createFilteredRowSet()` Creates a new instance of a FilteredRowSet.
`JdbcRowSet`	RowSetFactory.`createJdbcRowSet()` Creates a new instance of a JdbcRowSet.
`JoinRowSet`	RowSetFactory.`createJoinRowSet()` Creates a new instance of a JoinRowSet.
`RowSet`	CachedRowSet.`createShared()` Returns a new `RowSet` object backed by the same data as that of this `CachedRowSet` object.
`WebRowSet`	RowSetFactory.`createWebRowSet()` Creates a new instance of a WebRowSet.
`boolean`	Predicate.`evaluate(Object value, int column)` This method is called by a `FilteredRowSet` object to check whether the value lies between the filtering criterion (or criteria if multiple constraints exist) set using the `setFilter()` method.
`boolean`	Predicate.`evaluate(Object value, String columnName)` This method is called by the `FilteredRowSet` object to check whether the value lies between the filtering criteria set using the setFilter method.
`void`	CachedRowSet.`execute(Connection conn)` Populates this `CachedRowSet` object with data, using the given connection to produce the result set from which the data will be read.
`boolean`	JdbcRowSet.`getAutoCommit()` Each `JdbcRowSet` contains a `Connection` object from the original `ResultSet` or JDBC properties passed to it.
`String`	RowSetMetaDataImpl.`getCatalogName(int columnIndex)` Retrieves the catalog name of the table from which the value in the designated column was derived.
`String`	RowSetMetaDataImpl.`getColumnClassName(int columnIndex)` Retrieves the fully-qualified name of the class in the Java programming language to which a value in the designated column will be mapped.
`int`	RowSetMetaDataImpl.`getColumnCount()` Retrieves the number of columns in the `RowSet` object for which this `RowSetMetaDataImpl` object was created.
`int`	RowSetMetaDataImpl.`getColumnDisplaySize(int columnIndex)` Retrieves the normal maximum width in chars of the designated column.
`String`	RowSetMetaDataImpl.`getColumnLabel(int columnIndex)` Retrieves the the suggested column title for the designated column for use in printouts and displays.
`String`	RowSetMetaDataImpl.`getColumnName(int columnIndex)` Retrieves the name of the designated column.
`int`	RowSetMetaDataImpl.`getColumnType(int columnIndex)` Retrieves the type code (one of the `java.sql.Types` constants) for the SQL type of the value stored in the designated column.
`String`	RowSetMetaDataImpl.`getColumnTypeName(int columnIndex)` Retrieves the DBMS-specific type name for values stored in the designated column.
`int`	BaseRowSet.`getConcurrency()` Returns the concurrency for this `RowSet` object.
`boolean`	BaseRowSet.`getEscapeProcessing()` Ascertains whether escape processing is enabled for this `RowSet` object.
`int`	BaseRowSet.`getFetchDirection()` Retrieves this `RowSet` object's current setting for the fetch direction.
`int`	BaseRowSet.`getFetchSize()` Returns the fetch size for this `RowSet` object.
`int`	JoinRowSet.`getJoinType()` Returns a `int` describing the set SQL `JOIN` type governing this JoinRowSet instance.
`int[]`	CachedRowSet.`getKeyColumns()` Returns an array containing one or more column numbers indicating the columns that form a key that uniquely identifies a row in this `CachedRowSet` object.
`int[]`	Joinable.`getMatchColumnIndexes()` Retrieves the indexes of the match columns that were set for this `RowSet` object with the method `setMatchColumn(int[] columnIdxes)`.
`String[]`	Joinable.`getMatchColumnNames()` Retrieves the names of the match columns that were set for this `RowSet` object with the method `setMatchColumn(String [] columnNames)`.
`int`	BaseRowSet.`getMaxFieldSize()` Retrieves the maximum number of bytes that can be used for a column value in this `RowSet` object.
`int`	BaseRowSet.`getMaxRows()` Retrieves the maximum number of rows that this `RowSet` object may contain.
`ResultSet`	CachedRowSet.`getOriginal()` Returns a `ResultSet` object containing the original value of this `CachedRowSet` object.
`ResultSet`	CachedRowSet.`getOriginalRow()` Returns a `ResultSet` object containing the original value for the current row only of this `CachedRowSet` object.
`Object[]`	BaseRowSet.`getParams()` Retrieves an array containing the parameter values (both Objects and primitives) that have been set for this `RowSet` object's command and throws an `SQLException` object if all parameters have not been set.
`int`	RowSetMetaDataImpl.`getPrecision(int columnIndex)` Retrieves the total number of digits for values stored in the designated column.
`int`	BaseRowSet.`getQueryTimeout()` Retrieves the maximum number of seconds the driver will wait for a query to execute.
`String[]`	JoinRowSet.`getRowSetNames()` Returns a `String` array containing the names of the `RowSet` objects added to this `JoinRowSet` object.
`Collection<?>`	JoinRowSet.`getRowSets()` Returns a `Collection` object containing the `RowSet` objects that have been added to this `JoinRowSet` object.
`RowSetWarning`	JdbcRowSet.`getRowSetWarnings()` Retrieves the first warning reported by calls on this `JdbcRowSet` object.
`RowSetWarning`	CachedRowSet.`getRowSetWarnings()` Retrieves the first warning reported by calls on this `RowSet` object.
`int`	RowSetMetaDataImpl.`getScale(int columnIndex)` Retrieves the number of digits to the right of the decimal point for values stored in the designated column.
`String`	RowSetMetaDataImpl.`getSchemaName(int columnIndex)` Retrieves the schema name of the table from which the value in the designated column was derived.
`boolean`	BaseRowSet.`getShowDeleted()` Retrieves a `boolean` indicating whether rows marked for deletion appear in the set of current rows.
`boolean`	JdbcRowSet.`getShowDeleted()` Retrieves a `boolean` indicating whether rows marked for deletion appear in the set of current rows.
`boolean`	CachedRowSet.`getShowDeleted()` Retrieves a `boolean` indicating whether rows marked for deletion appear in the set of current rows.
`SyncProvider`	CachedRowSet.`getSyncProvider()` Retrieves the `SyncProvider` implementation for this `CachedRowSet` object.
`String`	CachedRowSet.`getTableName()` Returns an identifier for the object (table) that was used to create this `CachedRowSet` object.
`String`	RowSetMetaDataImpl.`getTableName(int columnIndex)` Retrieves the name of the table from which the value in the designated column was derived.
`int`	BaseRowSet.`getType()` Returns the type of this `RowSet` object.
`String`	BaseRowSet.`getUrl()` Retrieves the JDBC URL that this `RowSet` object's `javax.sql.Reader` object uses to make a connection with a relational database using a JDBC technology-enabled driver.
`String`	JoinRowSet.`getWhereClause()` Return a SQL-like description of the WHERE clause being used in a JoinRowSet object.
`boolean`	RowSetMetaDataImpl.`isAutoIncrement(int columnIndex)` Retrieves whether a value stored in the designated column is automatically numbered, and thus readonly.
`boolean`	RowSetMetaDataImpl.`isCaseSensitive(int columnIndex)` Indicates whether the case of the designated column's name matters.
`boolean`	RowSetMetaDataImpl.`isCurrency(int columnIndex)` Indicates whether a value stored in the designated column is a cash value.
`boolean`	RowSetMetaDataImpl.`isDefinitelyWritable(int columnIndex)` Indicates whether a write operation on the designated column will definitely succeed.
`int`	RowSetMetaDataImpl.`isNullable(int columnIndex)` Retrieves a constant indicating whether it is possible to store a `NULL` value in the designated column.
`boolean`	RowSetMetaDataImpl.`isReadOnly(int columnIndex)` Indicates whether the designated column is definitely not writable, thus readonly.
`boolean`	RowSetMetaDataImpl.`isSearchable(int columnIndex)` Indicates whether a value stored in the designated column can be used in a `WHERE` clause.
`boolean`	RowSetMetaDataImpl.`isSigned(int columnIndex)` Indicates whether a value stored in the designated column is a signed number.
`boolean`	RowSetMetaDataImpl.`isWrapperFor(Class<?> interfaces)` Returns true if this either implements the interface argument or is directly or indirectly a wrapper for an object that does.
`boolean`	RowSetMetaDataImpl.`isWritable(int columnIndex)` Indicates whether it is possible for a write operation on the designated column to succeed.
`static RowSetFactory`	RowSetProvider.`newFactory()` Creates a new instance of a `RowSetFactory` implementation.
`static RowSetFactory`	RowSetProvider.`newFactory(String factoryClassName, ClassLoader cl)` Creates a new instance of a `RowSetFactory` from the specified factory class name.
`boolean`	CachedRowSet.`nextPage()` Increments the current page of the `CachedRowSet`.
`protected void`	BaseRowSet.`notifyCursorMoved()` Notifies all of the listeners registered with this `RowSet` object that its cursor has moved.
`protected void`	BaseRowSet.`notifyRowChanged()` Notifies all of the listeners registered with this `RowSet` object that one of its rows has changed.
`protected void`	BaseRowSet.`notifyRowSetChanged()` Notifies all of the listeners registered with this `RowSet` object that its entire contents have changed.
`void`	CachedRowSet.`populate(ResultSet data)` Populates this `CachedRowSet` object with data from the given `ResultSet` object.
`void`	CachedRowSet.`populate(ResultSet rs, int startRow)` Populates this `CachedRowSet` object with data from the given `ResultSet` object.
`boolean`	CachedRowSet.`previousPage()` Decrements the current page of the `CachedRowSet`.
`void`	WebRowSet.`readXml(InputStream iStream)` Reads a stream based XML input to populate this `WebRowSet` object.
`void`	WebRowSet.`readXml(Reader reader)` Reads a `WebRowSet` object in its XML format from the given `Reader` object.
`void`	CachedRowSet.`release()` Releases the current contents of this `CachedRowSet` object and sends a `rowSetChanged` event to all registered listeners.
`void`	CachedRowSet.`restoreOriginal()` Restores this `CachedRowSet` object to its original value, that is, its value before the last set of changes.
`void`	JdbcRowSet.`rollback()` Each `JdbcRowSet` contains a `Connection` object from the original `ResultSet` or JDBC properties passed to it.
`void`	CachedRowSet.`rollback()` Each `CachedRowSet` object's `SyncProvider` contains a `Connection` object from the original `ResultSet` or JDBC properties passed to it.
`void`	JdbcRowSet.`rollback(Savepoint s)` Each `JdbcRowSet` contains a `Connection` object from the original `ResultSet` or JDBC properties passed to it.
`void`	CachedRowSet.`rollback(Savepoint s)` Each `CachedRowSet` object's `SyncProvider` contains a `Connection` object from the original `ResultSet` or JDBC properties passed to it.
`void`	CachedRowSet.`rowSetPopulated(RowSetEvent event, int numRows)` Notifies registered listeners that a RowSet object in the given RowSetEvent object has populated a number of additional rows.
`void`	BaseRowSet.`setArray(int parameterIndex, Array array)` Sets the designated parameter to an `Array` object in the Java programming language.
`void`	BaseRowSet.`setAsciiStream(int parameterIndex, InputStream x)` Sets the designated parameter in this `RowSet` object's command to the given input stream.
`void`	BaseRowSet.`setAsciiStream(int parameterIndex, InputStream x, int length)` Sets the designated parameter to the given `java.io.InputStream` object, which will have the specified number of bytes.
`void`	BaseRowSet.`setAsciiStream(String parameterName, InputStream x)` Sets the designated parameter to the given input stream.
`void`	BaseRowSet.`setAsciiStream(String parameterName, InputStream x, int length)` Sets the designated parameter to the given input stream, which will have the specified number of bytes.
`void`	JdbcRowSet.`setAutoCommit(boolean autoCommit)` Each `JdbcRowSet` contains a `Connection` object from the original `ResultSet` or JDBC properties passed to it.
`void`	RowSetMetaDataImpl.`setAutoIncrement(int columnIndex, boolean property)` Sets whether the designated column is automatically numbered, thus read-only, to the given `boolean` value.
`void`	BaseRowSet.`setBigDecimal(int parameterIndex, BigDecimal x)` Sets the designated parameter to the given `java.lang.BigDecimal` value.
`void`	BaseRowSet.`setBigDecimal(String parameterName, BigDecimal x)` Sets the designated parameter to the given `java.math.BigDecimal` value.
`void`	BaseRowSet.`setBinaryStream(int parameterIndex, InputStream x)` Sets the designated parameter in this `RowSet` object's command to the given input stream.
`void`	BaseRowSet.`setBinaryStream(int parameterIndex, InputStream x, int length)` Sets the designated parameter to the given `java.io.InputStream` object, which will have the specified number of bytes.
`void`	BaseRowSet.`setBinaryStream(String parameterName, InputStream x)` Sets the designated parameter to the given input stream.
`void`	BaseRowSet.`setBinaryStream(String parameterName, InputStream x, int length)` Sets the designated parameter to the given input stream, which will have the specified number of bytes.
`void`	BaseRowSet.`setBlob(int parameterIndex, Blob x)` Sets the designated parameter to the given `Blob` object in the Java programming language.
`void`	BaseRowSet.`setBlob(int parameterIndex, InputStream inputStream)` Sets the designated parameter to a `InputStream` object.
`void`	BaseRowSet.`setBlob(int parameterIndex, InputStream inputStream, long length)` Sets the designated parameter to a `InputStream` object.
`void`	BaseRowSet.`setBlob(String parameterName, Blob x)` Sets the designated parameter to the given `java.sql.Blob` object.
`void`	BaseRowSet.`setBlob(String parameterName, InputStream inputStream)` Sets the designated parameter to a `InputStream` object.
`void`	BaseRowSet.`setBlob(String parameterName, InputStream inputStream, long length)` Sets the designated parameter to a `InputStream` object.
`void`	BaseRowSet.`setBoolean(int parameterIndex, boolean x)` Sets the designated parameter to the given `boolean` in the Java programming language.
`void`	BaseRowSet.`setBoolean(String parameterName, boolean x)` Sets the designated parameter to the given Java `boolean` value.
`void`	BaseRowSet.`setByte(int parameterIndex, byte x)` Sets the designated parameter to the given `byte` in the Java programming language.
`void`	BaseRowSet.`setByte(String parameterName, byte x)` Sets the designated parameter to the given Java `byte` value.
`void`	BaseRowSet.`setBytes(int parameterIndex, byte[] x)` Sets the designated parameter to the given array of bytes.
`void`	BaseRowSet.`setBytes(String parameterName, byte[] x)` Sets the designated parameter to the given Java array of bytes.
`void`	RowSetMetaDataImpl.`setCaseSensitive(int columnIndex, boolean property)` Sets whether the name of the designated column is case sensitive to the given `boolean`.
`void`	RowSetMetaDataImpl.`setCatalogName(int columnIndex, String catalogName)` Sets the catalog name of the table from which the designated column was derived to catalogName.
`void`	BaseRowSet.`setCharacterStream(int parameterIndex, Reader reader)` Sets the designated parameter in this `RowSet` object's command to the given `Reader` object.
`void`	BaseRowSet.`setCharacterStream(int parameterIndex, Reader reader, int length)` Sets the designated parameter to the given `java.io.Reader` object, which will have the specified number of characters.
`void`	BaseRowSet.`setCharacterStream(String parameterName, Reader reader)` Sets the designated parameter to the given `Reader` object.
`void`	BaseRowSet.`setCharacterStream(String parameterName, Reader reader, int length)` Sets the designated parameter to the given `Reader` object, which is the given number of characters long.
`void`	BaseRowSet.`setClob(int parameterIndex, Clob x)` Sets the designated parameter to the given `Clob` object in the Java programming language.
`void`	BaseRowSet.`setClob(int parameterIndex, Reader reader)` Sets the designated parameter to a `Reader` object.
`void`	BaseRowSet.`setClob(int parameterIndex, Reader reader, long length)` Sets the designated parameter to a `Reader` object.
`void`	BaseRowSet.`setClob(String parameterName, Clob x)` Sets the designated parameter to the given `java.sql.Clob` object.
`void`	BaseRowSet.`setClob(String parameterName, Reader reader)` Sets the designated parameter to a `Reader` object.
`void`	BaseRowSet.`setClob(String parameterName, Reader reader, long length)` Sets the designated parameter to a `Reader` object.
`void`	RowSetMetaDataImpl.`setColumnCount(int columnCount)` Sets to the given number the number of columns in the `RowSet` object for which this `RowSetMetaDataImpl` object was created.
`void`	RowSetMetaDataImpl.`setColumnDisplaySize(int columnIndex, int size)` Sets the normal maximum number of chars in the designated column to the given number.
`void`	RowSetMetaDataImpl.`setColumnLabel(int columnIndex, String label)` Sets the suggested column label for use in printouts and displays, if any, to label.
`void`	RowSetMetaDataImpl.`setColumnName(int columnIndex, String columnName)` Sets the column name of the designated column to the given name.
`void`	RowSetMetaDataImpl.`setColumnType(int columnIndex, int SQLType)` Sets the SQL type code for values stored in the designated column to the given type code from the class `java.sql.Types`.
`void`	RowSetMetaDataImpl.`setColumnTypeName(int columnIndex, String typeName)` Sets the type name used by the data source for values stored in the designated column to the given type name.
`void`	BaseRowSet.`setCommand(String cmd)` Sets this `RowSet` object's `command` property to the given `String` object and clears the parameters, if any, that were set for the previous command.
`void`	BaseRowSet.`setConcurrency(int concurrency)` Sets the concurrency for this `RowSet` object to the specified concurrency.
`void`	RowSetMetaDataImpl.`setCurrency(int columnIndex, boolean property)` Sets whether a value stored in the designated column is a cash value to the given `boolean`.
`void`	BaseRowSet.`setDataSourceName(String name)` Sets the `DataSource` name property for this `RowSet` object to the given logical name and sets this `RowSet` object's Url property to `null`.
`void`	BaseRowSet.`setDate(int parameterIndex, Date x)` Sets the designated parameter to the given `java.sql.Date` value.
`void`	BaseRowSet.`setDate(int parameterIndex, Date x, Calendar cal)` Sets the designated parameter to the given `java.sql.Date` object.
`void`	BaseRowSet.`setDate(String parameterName, Date x)` Sets the designated parameter to the given `java.sql.Date` value using the default time zone of the virtual machine that is running the application.
`void`	BaseRowSet.`setDate(String parameterName, Date x, Calendar cal)` Sets the designated parameter to the given `java.sql.Date` value, using the given `Calendar` object.
`void`	BaseRowSet.`setDouble(int parameterIndex, double x)` Sets the designated parameter to the given `double` in the Java programming language.
`void`	BaseRowSet.`setDouble(String parameterName, double x)` Sets the designated parameter to the given Java `double` value.
`void`	BaseRowSet.`setEscapeProcessing(boolean enable)` Sets to the given `boolean` whether or not the driver will scan for escape syntax and do escape substitution before sending SQL statements to the database.
`void`	BaseRowSet.`setFetchDirection(int direction)` Gives the driver a performance hint as to the direction in which the rows in this `RowSet` object will be processed.
`void`	BaseRowSet.`setFetchSize(int rows)` Sets the fetch size for this `RowSet` object to the given number of rows.
`void`	FilteredRowSet.`setFilter(Predicate p)` Applies the given `Predicate` object to this `FilteredRowSet` object.
`void`	BaseRowSet.`setFloat(int parameterIndex, float x)` Sets the designated parameter to the given `float` in the Java programming language.
`void`	BaseRowSet.`setFloat(String parameterName, float x)` Sets the designated parameter to the given Java `float` value.
`void`	BaseRowSet.`setInt(int parameterIndex, int x)` Sets the designated parameter to an `int` in the Java programming language.
`void`	BaseRowSet.`setInt(String parameterName, int x)` Sets the designated parameter to the given Java `int` value.
`void`	JoinRowSet.`setJoinType(int joinType)` Allow the application to adjust the type of `JOIN` imposed on tables contained within the JoinRowSet object instance.
`void`	CachedRowSet.`setKeyColumns(int[] keys)` Sets this `CachedRowSet` object's `keyCols` field with the given array of column numbers, which forms a key for uniquely identifying a row in this `CachedRowSet` object.
`void`	BaseRowSet.`setLong(int parameterIndex, long x)` Sets the designated parameter to the given `long` in the Java programming language.
`void`	BaseRowSet.`setLong(String parameterName, long x)` Sets the designated parameter to the given Java `long` value.
`void`	Joinable.`setMatchColumn(int columnIdx)` Sets the designated column as the match column for this `RowSet` object.
`void`	Joinable.`setMatchColumn(int[] columnIdxes)` Sets the designated columns as the match column for this `RowSet` object.
`void`	Joinable.`setMatchColumn(String columnName)` Sets the designated column as the match column for this `RowSet` object.
`void`	Joinable.`setMatchColumn(String[] columnNames)` Sets the designated columns as the match column for this `RowSet` object.
`void`	BaseRowSet.`setMaxFieldSize(int max)` Sets the maximum number of bytes that can be used for a column value in this `RowSet` object to the given number.
`void`	BaseRowSet.`setMaxRows(int max)` Sets the maximum number of rows that this `RowSet` object may contain to the given number.
`void`	CachedRowSet.`setMetaData(RowSetMetaData md)` Sets the metadata for this `CachedRowSet` object with the given `RowSetMetaData` object.
`void`	BaseRowSet.`setNCharacterStream(int parameterIndex, Reader value)` Sets the designated parameter in this `RowSet` object's command to a `Reader` object.
`void`	BaseRowSet.`setNCharacterStream(int parameterIndex, Reader value, long length)` Sets the designated parameter to a `Reader` object.
`void`	BaseRowSet.`setNCharacterStream(String parameterName, Reader value)` Sets the designated parameter to a `Reader` object.
`void`	BaseRowSet.`setNCharacterStream(String parameterName, Reader value, long length)` Sets the designated parameter to a `Reader` object.
`void`	BaseRowSet.`setNClob(int parameterIndex, NClob value)` Sets the designated parameter to a `java.sql.NClob` object.
`void`	BaseRowSet.`setNClob(int parameterIndex, Reader reader)` Sets the designated parameter to a `Reader` object.
`void`	BaseRowSet.`setNClob(int parameterIndex, Reader reader, long length)` Sets the designated parameter to a `Reader` object.
`void`	BaseRowSet.`setNClob(String parameterName, NClob value)` Sets the designated parameter to a `java.sql.NClob` object.
`void`	BaseRowSet.`setNClob(String parameterName, Reader reader)` Sets the designated parameter to a `Reader` object.
`void`	BaseRowSet.`setNClob(String parameterName, Reader reader, long length)` Sets the designated parameter to a `Reader` object.
`void`	BaseRowSet.`setNString(int parameterIndex, String value)` Sets the designated parameter to the given `String` object.
`void`	BaseRowSet.`setNString(String parameterName, String value)` Sets the designated parameter to the given `String` object.
`void`	BaseRowSet.`setNull(int parameterIndex, int sqlType)` Sets the designated parameter to SQL `NULL`.
`void`	BaseRowSet.`setNull(int parameterIndex, int sqlType, String typeName)` Sets the designated parameter to SQL `NULL`.
`void`	BaseRowSet.`setNull(String parameterName, int sqlType)` Sets the designated parameter to SQL `NULL`.
`void`	BaseRowSet.`setNull(String parameterName, int sqlType, String typeName)` Sets the designated parameter to SQL `NULL`.
`void`	RowSetMetaDataImpl.`setNullable(int columnIndex, int property)` Sets whether a value stored in the designated column can be set to `NULL` to the given constant from the interface `ResultSetMetaData`.
`void`	BaseRowSet.`setObject(int parameterIndex, Object x)` Sets the designated parameter to an `Object` in the Java programming language.
`void`	BaseRowSet.`setObject(int parameterIndex, Object x, int targetSqlType)` Sets the value of the designated parameter with the given `Object` value.
`void`	BaseRowSet.`setObject(int parameterIndex, Object x, int targetSqlType, int scale)` Sets the designated parameter to an `Object` in the Java programming language.
`void`	BaseRowSet.`setObject(String parameterName, Object x)` Sets the value of the designated parameter with the given object.
`void`	BaseRowSet.`setObject(String parameterName, Object x, int targetSqlType)` Sets the value of the designated parameter with the given object.
`void`	BaseRowSet.`setObject(String parameterName, Object x, int targetSqlType, int scale)` Sets the value of the designated parameter with the given object.
`void`	CachedRowSet.`setOriginalRow()` Sets the current row in this `CachedRowSet` object as the original row.
`void`	CachedRowSet.`setPageSize(int size)` Sets the `CachedRowSet` object's page-size.
`void`	RowSetMetaDataImpl.`setPrecision(int columnIndex, int precision)` Sets the total number of decimal digits in a value stored in the designated column to the given number.
`void`	BaseRowSet.`setQueryTimeout(int seconds)` Sets to the given number the maximum number of seconds the driver will wait for a query to execute.
`void`	BaseRowSet.`setRef(int parameterIndex, Ref ref)` Sets the designated parameter to the given `Ref` object in the Java programming language.
`void`	BaseRowSet.`setRowId(int parameterIndex, RowId x)` Sets the designated parameter to the given `java.sql.RowId` object.
`void`	BaseRowSet.`setRowId(String parameterName, RowId x)` Sets the designated parameter to the given `java.sql.RowId` object.
`void`	RowSetMetaDataImpl.`setScale(int columnIndex, int scale)` Sets the number of digits to the right of the decimal point in a value stored in the designated column to the given number.
`void`	RowSetMetaDataImpl.`setSchemaName(int columnIndex, String schemaName)` Sets the designated column's table's schema name, if any, to schemaName.
`void`	RowSetMetaDataImpl.`setSearchable(int columnIndex, boolean property)` Sets whether a value stored in the designated column can be used in a `WHERE` clause to the given `boolean` value.
`void`	BaseRowSet.`setShort(int parameterIndex, short x)` Sets the designated parameter to the given `short` in the Java programming language.
`void`	BaseRowSet.`setShort(String parameterName, short x)` Sets the designated parameter to the given Java `short` value.
`void`	BaseRowSet.`setShowDeleted(boolean value)` Sets the property `showDeleted` to the given `boolean` value, which determines whether rows marked for deletion appear in the set of current rows.
`void`	JdbcRowSet.`setShowDeleted(boolean b)` Sets the property `showDeleted` to the given `boolean` value.
`void`	CachedRowSet.`setShowDeleted(boolean b)` Sets the property `showDeleted` to the given `boolean` value, which determines whether rows marked for deletion appear in the set of current rows.
`void`	RowSetMetaDataImpl.`setSigned(int columnIndex, boolean property)` Sets whether a value stored in the designated column is a signed number to the given `boolean`.
`void`	BaseRowSet.`setSQLXML(int parameterIndex, SQLXML xmlObject)` Sets the designated parameter to the given `java.sql.SQLXML` object.
`void`	BaseRowSet.`setSQLXML(String parameterName, SQLXML xmlObject)` Sets the designated parameter to the given `java.sql.SQLXML` object.
`void`	BaseRowSet.`setString(int parameterIndex, String x)` Sets the designated parameter to the given `String` value.
`void`	BaseRowSet.`setString(String parameterName, String x)` Sets the designated parameter to the given Java `String` value.
`void`	CachedRowSet.`setSyncProvider(String provider)` Sets the `SyncProvider` object for this `CachedRowSet` object to the one specified.
`void`	RowSetMetaDataImpl.`setTableName(int columnIndex, String tableName)` Sets the name of the table from which the designated column was derived to the given table name.
`void`	CachedRowSet.`setTableName(String tabName)` Sets the identifier for the table from which this `CachedRowSet` object was derived to the given table name.
`void`	BaseRowSet.`setTime(int parameterIndex, Time x)` Sets the designated parameter to the given `java.sql.Time` value.
`void`	BaseRowSet.`setTime(int parameterIndex, Time x, Calendar cal)` Sets the designated parameter to the given `java.sql.Time` object.
`void`	BaseRowSet.`setTime(String parameterName, Time x)` Sets the designated parameter to the given `java.sql.Time` value.
`void`	BaseRowSet.`setTime(String parameterName, Time x, Calendar cal)` Sets the designated parameter to the given `java.sql.Time` value, using the given `Calendar` object.
`void`	BaseRowSet.`setTimestamp(int parameterIndex, Timestamp x)` Sets the designated parameter to the given `java.sql.Timestamp` value.
`void`	BaseRowSet.`setTimestamp(int parameterIndex, Timestamp x, Calendar cal)` Sets the designated parameter to the given `java.sql.Timestamp` object.
`void`	BaseRowSet.`setTimestamp(String parameterName, Timestamp x)` Sets the designated parameter to the given `java.sql.Timestamp` value.
`void`	BaseRowSet.`setTimestamp(String parameterName, Timestamp x, Calendar cal)` Sets the designated parameter to the given `java.sql.Timestamp` value, using the given `Calendar` object.
`void`	BaseRowSet.`setTransactionIsolation(int level)` Sets the transaction isolation property for this JDBC `RowSet` object to the given constant.
`void`	BaseRowSet.`setType(int type)` Sets the type for this `RowSet` object to the specified type.
`void`	BaseRowSet.`setUnicodeStream(int parameterIndex, InputStream x, int length)` Deprecated. getCharacterStream should be used in its place
`void`	BaseRowSet.`setURL(int parameterIndex, URL x)` Sets the designated parameter to the given `java.net.URL` value.
`void`	BaseRowSet.`setUrl(String url)` Sets the Url property for this `RowSet` object to the given `String` object and sets the dataSource name property to `null`.
`CachedRowSet`	JoinRowSet.`toCachedRowSet()` Creates a new `CachedRowSet` object containing the data in this `JoinRowSet` object, which can be saved to a data source using the `SyncProvider` object for the `CachedRowSet` object.
`Collection<?>`	CachedRowSet.`toCollection()` Converts this `CachedRowSet` object to a `Collection` object that contains all of this `CachedRowSet` object's data.
`Collection<?>`	CachedRowSet.`toCollection(int column)` Converts the designated column in this `CachedRowSet` object to a `Collection` object.
`Collection<?>`	CachedRowSet.`toCollection(String column)` Converts the designated column in this `CachedRowSet` object to a `Collection` object.
`void`	CachedRowSet.`undoDelete()` Cancels the deletion of the current row and notifies listeners that a row has changed.
`void`	CachedRowSet.`undoInsert()` Immediately removes the current row from this `CachedRowSet` object if the row has been inserted, and also notifies listeners that a row has changed.
`void`	CachedRowSet.`undoUpdate()` Immediately reverses the last update operation if the row has been modified.
`void`	Joinable.`unsetMatchColumn(int columnIdx)` Unsets the designated column as the match column for this `RowSet` object.
`void`	Joinable.`unsetMatchColumn(int[] columnIdxes)` Unsets the designated columns as the match column for this `RowSet` object.
`void`	Joinable.`unsetMatchColumn(String columnName)` Unsets the designated column as the match column for this `RowSet` object.
`void`	Joinable.`unsetMatchColumn(String[] columnName)` Unsets the designated columns as the match columns for this `RowSet` object.
`<T> T`	RowSetMetaDataImpl.`unwrap(Class<T> iface)` Returns an object that implements the given interface to allow access to non-standard methods, or standard methods not exposed by the proxy.
`void`	WebRowSet.`writeXml(OutputStream oStream)` Writes the data, properties, and metadata for this `WebRowSet` object to the given `OutputStream` object in XML format.
`void`	WebRowSet.`writeXml(ResultSet rs, OutputStream oStream)` Populates this `WebRowSet` object with the contents of the given `ResultSet` object and writes its data, properties, and metadata to the given `OutputStream` object in XML format.
`void`	WebRowSet.`writeXml(ResultSet rs, Writer writer)` Populates this `WebRowSet` object with the contents of the given `ResultSet` object and writes its data, properties, and metadata to the given `Writer` object in XML format.
`void`	WebRowSet.`writeXml(Writer writer)` Writes the data, properties, and metadata for this `WebRowSet` object to the given `Writer` object in XML format.

Uses of SQLException in javax.sql.rowset.serial

Subclasses of SQLException in javax.sql.rowset.serial
Modifier and Type	Class and Description
`class`	`SerialException` Indicates and an error with the serialization or de-serialization of SQL types such as `BLOB, CLOB, STRUCT or ARRAY` in addition to SQL types such as `DATALINK and JAVAOBJECT`

Methods in javax.sql.rowset.serial that throw SQLException
Modifier and Type	Method and Description
`void`	SerialArray.`free()` This method frees the `SeriableArray` object and releases the resources that it holds.
`void`	SerialClob.`free()` This method frees the `SeriableClob` object and releases the resources that it holds.
`void`	SerialBlob.`free()` This method frees the `SeriableBlob` object and releases the resources that it holds.
`InputStream`	SerialClob.`getAsciiStream()` Retrieves the `CLOB` value designated by this `SerialClob` object as an ascii stream.
`InputStream`	SerialBlob.`getBinaryStream(long pos, long length)` Returns an `InputStream` object that contains a partial `Blob` value, starting with the byte specified by pos, which is length bytes in length.
`Reader`	SerialClob.`getCharacterStream(long pos, long length)` Returns a `Reader` object that contains a partial `SerialClob` value, starting with the character specified by pos, which is length characters in length.
`long`	SerialBlob.`position(Blob pattern, long start)` Returns the position in this `SerialBlob` object where the given `Blob` object begins, starting the search at the specified position.
`long`	SerialBlob.`position(byte[] pattern, long start)` Returns the position in this `SerialBlob` object where the given pattern of bytes begins, starting the search at the specified position.
`long`	SerialClob.`position(Clob searchStr, long start)` Returns the position in this `SerialClob` object where the given `Clob` signature begins, starting the search at the specified position.
`long`	SerialClob.`position(String searchStr, long start)` Returns the position in this `SerialClob` object where the given `String` object begins, starting the search at the specified position.
`Array`	SQLInputImpl.`readArray()` Reads an SQL `ARRAY` value from the stream and returns it as an `Array` object in the Java programming language.
`InputStream`	SQLInputImpl.`readAsciiStream()` Returns the next attribute in this `SQLInputImpl` object as a stream of ASCII characters.
`BigDecimal`	SQLInputImpl.`readBigDecimal()` Retrieves the next attribute in this `SQLInputImpl` object as a `java.math.BigDecimal`.
`InputStream`	SQLInputImpl.`readBinaryStream()` Returns the next attribute in this `SQLInputImpl` object as a stream of uninterpreted bytes.
`Blob`	SQLInputImpl.`readBlob()` Retrieves the `BLOB` value at the head of this `SQLInputImpl` object as a `Blob` object in the Java programming language.
`boolean`	SQLInputImpl.`readBoolean()` Retrieves the next attribute in this `SQLInputImpl` object as a `boolean` in the Java programming language.
`byte`	SQLInputImpl.`readByte()` Retrieves the next attribute in this `SQLInputImpl` object as a `byte` in the Java programming language.
`byte[]`	SQLInputImpl.`readBytes()` Retrieves the next attribute in this `SQLInputImpl` object as an array of bytes.
`Reader`	SQLInputImpl.`readCharacterStream()` Retrieves the next attribute in this `SQLInputImpl` object as a stream of Unicode characters.
`Clob`	SQLInputImpl.`readClob()` Retrieves the `CLOB` value at the head of this `SQLInputImpl` object as a `Clob` object in the Java programming language.
`Date`	SQLInputImpl.`readDate()` Retrieves the next attribute in this `SQLInputImpl` as a `java.sql.Date` object.
`double`	SQLInputImpl.`readDouble()` Retrieves the next attribute in this `SQLInputImpl` object as a `double` in the Java programming language.
`float`	SQLInputImpl.`readFloat()` Retrieves the next attribute in this `SQLInputImpl` object as a `float` in the Java programming language.
`int`	SQLInputImpl.`readInt()` Retrieves the next attribute in this `SQLInputImpl` object as an `int` in the Java programming language.
`long`	SQLInputImpl.`readLong()` Retrieves the next attribute in this `SQLInputImpl` object as a `long` in the Java programming language.
`NClob`	SQLInputImpl.`readNClob()` Reads an SQL `NCLOB` value from the stream and returns it as a `Clob` object in the Java programming language.
`String`	SQLInputImpl.`readNString()` Reads the next attribute in the stream and returns it as a `String` in the Java programming language.
`Object`	SQLInputImpl.`readObject()` Retrieves the value at the head of this `SQLInputImpl` object as an `Object` in the Java programming language.
`Ref`	SQLInputImpl.`readRef()` Retrieves the value at the head of this `SQLInputImpl` object as a `Ref` object in the Java programming language.
`RowId`	SQLInputImpl.`readRowId()` Reads an SQL `ROWID` value from the stream and returns it as a `RowId` object in the Java programming language.
`short`	SQLInputImpl.`readShort()` Retrieves the next attribute in this `SQLInputImpl` object as a `short` in the Java programming language.
`SQLXML`	SQLInputImpl.`readSQLXML()` Reads an SQL `XML` value from the stream and returns it as a `SQLXML` object in the Java programming language.
`String`	SQLInputImpl.`readString()` Retrieves the next attribute in this `SQLInputImpl` object as a `String` in the Java programming language.
`Time`	SQLInputImpl.`readTime()` Retrieves the next attribute in this `SQLInputImpl` object as a `java.sql.Time` object.
`Timestamp`	SQLInputImpl.`readTimestamp()` Retrieves the next attribute in this `SQLInputImpl` object as a `java.sql.Timestamp` object.
`URL`	SQLInputImpl.`readURL()` Reads an SQL `DATALINK` value from the stream and returns it as an `URL` object in the Java programming language.
`OutputStream`	SerialClob.`setAsciiStream(long pos)` Retrieves a stream to be used to write Ascii characters to the `CLOB` value that this `SerialClob` object represents, starting at position `pos`.
`OutputStream`	SerialBlob.`setBinaryStream(long pos)` Retrieves a stream that can be used to write to the `BLOB` value that this `Blob` object represents.
`int`	SerialBlob.`setBytes(long pos, byte[] bytes)` Writes the given array of bytes to the `BLOB` value that this `Blob` object represents, starting at position `pos`, and returns the number of bytes written.
`int`	SerialBlob.`setBytes(long pos, byte[] bytes, int offset, int length)` Writes all or part of the given `byte` array to the `BLOB` value that this `Blob` object represents and returns the number of bytes written.
`Writer`	SerialClob.`setCharacterStream(long pos)` Retrieves a stream to be used to write a stream of Unicode characters to the `CLOB` value that this `SerialClob` object represents, at position `pos`.
`boolean`	SQLInputImpl.`wasNull()` Ascertains whether the last value read from this `SQLInputImpl` object was `null`.
`void`	SQLOutputImpl.`writeArray(Array x)` Writes an `Array` object in the Java programming language to this `SQLOutputImpl` object.
`void`	SQLOutputImpl.`writeAsciiStream(InputStream x)` Writes a stream of ASCII characters to this `SQLOutputImpl` object.
`void`	SQLOutputImpl.`writeBigDecimal(BigDecimal x)` Writes a `java.math.BigDecimal` object in the Java programming language to this `SQLOutputImpl` object.
`void`	SQLOutputImpl.`writeBinaryStream(InputStream x)` Writes a stream of uninterpreted bytes to this `SQLOutputImpl` object.
`void`	SQLOutputImpl.`writeBlob(Blob x)` Writes a `Blob` object in the Java programming language to this `SQLOutputImpl` object.
`void`	SQLOutputImpl.`writeBoolean(boolean x)` Writes a `boolean` in the Java programming language to this `SQLOutputImpl` object.
`void`	SQLOutputImpl.`writeByte(byte x)` Writes a `byte` in the Java programming language to this `SQLOutputImpl` object.
`void`	SQLOutputImpl.`writeBytes(byte[] x)` Writes an array of `bytes` in the Java programming language to this `SQLOutputImpl` object.
`void`	SQLOutputImpl.`writeCharacterStream(Reader x)` Writes a stream of Unicode characters to this `SQLOutputImpl` object.
`void`	SQLOutputImpl.`writeClob(Clob x)` Writes a `Clob` object in the Java programming language to this `SQLOutputImpl` object.
`void`	SQLOutputImpl.`writeDate(Date x)` Writes a `java.sql.Date` object in the Java programming language to this `SQLOutputImpl` object.
`void`	SQLOutputImpl.`writeDouble(double x)` Writes a `double` in the Java programming language to this `SQLOutputImpl` object.
`void`	SQLOutputImpl.`writeFloat(float x)` Writes a `float` in the Java programming language to this `SQLOutputImpl` object.
`void`	SQLOutputImpl.`writeInt(int x)` Writes an `int` in the Java programming language to this `SQLOutputImpl` object.
`void`	SQLOutputImpl.`writeLong(long x)` Writes a `long` in the Java programming language to this `SQLOutputImpl` object.
`void`	SQLOutputImpl.`writeNClob(NClob x)` Writes an SQL `NCLOB` value to the stream.
`void`	SQLOutputImpl.`writeNString(String x)` Writes the next attribute to the stream as a `String` in the Java programming language.
`void`	SQLOutputImpl.`writeObject(SQLData x)` Writes to the stream the data contained in the given `SQLData` object.
`void`	SQLOutputImpl.`writeRef(Ref x)` Writes a `Ref` object in the Java programming language to this `SQLOutputImpl` object.
`void`	SQLOutputImpl.`writeRowId(RowId x)` Writes an SQL `ROWID` value to the stream.
`void`	SQLOutputImpl.`writeShort(short x)` Writes a `short` in the Java programming language to this `SQLOutputImpl` object.
`void`	SQLOutputImpl.`writeSQLXML(SQLXML x)` Writes an SQL `XML` value to the stream.
`void`	SQLOutputImpl.`writeString(String x)` Writes a `String` in the Java programming language to this `SQLOutputImpl` object.
`void`	SQLOutputImpl.`writeStruct(Struct x)` Writes a `Struct` object in the Java programming language to this `SQLOutputImpl` object.
`void`	SQLOutputImpl.`writeTime(Time x)` Writes a `java.sql.Time` object in the Java programming language to this `SQLOutputImpl` object.
`void`	SQLOutputImpl.`writeTimestamp(Timestamp x)` Writes a `java.sql.Timestamp` object in the Java programming language to this `SQLOutputImpl` object.
`void`	SQLOutputImpl.`writeURL(URL url)` Writes an `java.sql.Type.DATALINK` object in the Java programming language to this `SQLOutputImpl` object.

Constructors in javax.sql.rowset.serial that throw SQLException
Constructor and Description
`SerialArray(Array array)` Constructs a new `SerialArray` object from the given `Array` object.
`SerialArray(Array array, Map<String,Class<?>> map)` Constructs a new `SerialArray` object from the given `Array` object, using the given type map for the custom mapping of each element when the elements are SQL UDTs.
`SerialBlob(Blob blob)` Constructs a `SerialBlob` object that is a serialized version of the given `Blob` object.
`SerialBlob(byte[] b)` Constructs a `SerialBlob` object that is a serialized version of the given `byte` array.
`SerialClob(char[] ch)` Constructs a `SerialClob` object that is a serialized version of the given `char` array.
`SerialClob(Clob clob)` Constructs a `SerialClob` object that is a serialized version of the given `Clob` object.
`SerialRef(Ref ref)` Constructs a `SerialRef` object from the given `Ref` object.
`SQLInputImpl(Object[] attributes, Map<String,Class<?>> map)` Creates an `SQLInputImpl` object initialized with the given array of attributes and the given type map.
`SQLOutputImpl(Vector<?> attributes, Map<String,?> map)` Creates a new `SQLOutputImpl` object initialized with the given vector of attributes and type map.

Uses of SQLException in javax.sql.rowset.spi

Subclasses of SQLException in javax.sql.rowset.spi
Modifier and Type	Class and Description
`class`	`SyncFactoryException` Indicates an error with `SyncFactory` mechanism.
`class`	`SyncProviderException` Indicates an error with the `SyncProvider` mechanism.

Methods in javax.sql.rowset.spi that throw SQLException
Modifier and Type	Method and Description
`void`	TransactionalWriter.`commit()` Makes permanent all changes that have been performed by the `acceptChanges` method since the last call to either the `commit` or `rollback` methods.
`Object`	SyncResolver.`getConflictValue(int index)` Retrieves the value in the designated column in the current row of this `SyncResolver` object, which is the value in the data source that caused a conflict.
`Object`	SyncResolver.`getConflictValue(String columnName)` Retrieves the value in the designated column in the current row of this `SyncResolver` object, which is the value in the data source that caused a conflict.
`boolean`	SyncResolver.`nextConflict()` Moves the cursor down from its current position to the next row that contains a conflict value.
`boolean`	SyncResolver.`previousConflict()` Moves the cursor up from its current position to the previous conflict row in this `SyncResolver` object.
`void`	XmlReader.`readXML(WebRowSet caller, Reader reader)` Reads and parses the given `WebRowSet` object from the given input stream in XML format.
`void`	TransactionalWriter.`rollback()` Undoes all changes made in the current transaction.
`void`	TransactionalWriter.`rollback(Savepoint s)` Undoes all changes made in the current transaction made prior to the given `Savepoint` object.
`void`	SyncResolver.`setResolvedValue(int index, Object obj)` Sets obj as the value in column index in the current row of the `RowSet` object that is being synchronized.
`void`	SyncResolver.`setResolvedValue(String columnName, Object obj)` Sets obj as the value in column columnName in the current row of the `RowSet` object that is being synchronized.
`void`	XmlWriter.`writeXML(WebRowSet caller, Writer writer)` Writes the given `WebRowSet` object to the specified `java.io.Writer` output stream as an XML document.

Submit a bug or feature
For further API reference and developer documentation, see Java SE Documentation. That documentation contains more detailed, developer-targeted descriptions, with conceptual overviews, definitions of terms, workarounds, and working code examples.
Copyright © 1993, 2014, Oracle and/or its affiliates. All rights reserved.

Uses of Classjava.sql.SQLException

Uses of SQLException in java.sql

Uses of SQLException in javax.sql

Uses of SQLException in javax.sql.rowset

Uses of SQLException in javax.sql.rowset.serial

Uses of SQLException in javax.sql.rowset.spi

Uses of Class
java.sql.SQLException