LookupOp (Java Platform SE 7 )

java.lang.Object
- java.awt.image.LookupOp

All Implemented Interfaces:

BufferedImageOp, RasterOp
```
public class LookupOp
extends Object
implements BufferedImageOp, RasterOp
```
This class implements a lookup operation from the source to the destination. The LookupTable object may contain a single array or multiple arrays, subject to the restrictions below.
For Rasters, the lookup operates on bands. The number of lookup arrays may be one, in which case the same array is applied to all bands, or it must equal the number of Source Raster bands.
For BufferedImages, the lookup operates on color and alpha components. The number of lookup arrays may be one, in which case the same array is applied to all color (but not alpha) components. Otherwise, the number of lookup arrays may equal the number of Source color components, in which case no lookup of the alpha component (if present) is performed. If neither of these cases apply, the number of lookup arrays must equal the number of Source color components plus alpha components, in which case lookup is performed for all color and alpha components. This allows non-uniform rescaling of multi-band BufferedImages.
BufferedImage sources with premultiplied alpha data are treated in the same manner as non-premultiplied images for purposes of the lookup. That is, the lookup is done per band on the raw data of the BufferedImage source without regard to whether the data is premultiplied. If a color conversion is required to the destination ColorModel, the premultiplied state of both source and destination will be taken into account for this step.
Images with an IndexColorModel cannot be used.
If a RenderingHints object is specified in the constructor, the color rendering hint and the dithering hint may be used when color conversion is required.
This class allows the Source to be the same as the Destination.

See Also:
LookupTable, RenderingHints.KEY_COLOR_RENDERING, RenderingHints.KEY_DITHERING

Constructor Summary

Constructors
Constructor and Description
`LookupOp(LookupTable lookup, RenderingHints hints)` Constructs a `LookupOp` object given the lookup table and a `RenderingHints` object, which might be `null`.

Method Summary

Methods
Modifier and Type	Method and Description
`BufferedImage`	`createCompatibleDestImage(BufferedImage src, ColorModel destCM)` Creates a zeroed destination image with the correct size and number of bands.
`WritableRaster`	`createCompatibleDestRaster(Raster src)` Creates a zeroed-destination `Raster` with the correct size and number of bands, given this source.
`BufferedImage`	`filter(BufferedImage src, BufferedImage dst)` Performs a lookup operation on a `BufferedImage`.
`WritableRaster`	`filter(Raster src, WritableRaster dst)` Performs a lookup operation on a `Raster`.
`Rectangle2D`	`getBounds2D(BufferedImage src)` Returns the bounding box of the filtered destination image.
`Rectangle2D`	`getBounds2D(Raster src)` Returns the bounding box of the filtered destination Raster.
`Point2D`	`getPoint2D(Point2D srcPt, Point2D dstPt)` Returns the location of the destination point given a point in the source.
`RenderingHints`	`getRenderingHints()` Returns the rendering hints for this op.
`LookupTable`	`getTable()` Returns the `LookupTable`.

Methods inherited from class java.lang.Object
clone, equals, finalize, getClass, hashCode, notify, notifyAll, toString, wait, wait, wait

- Constructor Detail
  - LookupOp
```
public LookupOp(LookupTable lookup,
        RenderingHints hints)
```
    Constructs a LookupOp object given the lookup table and a RenderingHints object, which might be null.
    
    Parameters:
    lookup - the specified LookupTable
    hints - the specified RenderingHints, or null
- Method Detail
  - getTable
```
public final LookupTable getTable()
```
    Returns the LookupTable.
    
    Returns:
    the LookupTable of this LookupOp.
  - filter
```
public final BufferedImage filter(BufferedImage src,
                   BufferedImage dst)
```
    Performs a lookup operation on a BufferedImage. If the color model in the source image is not the same as that in the destination image, the pixels will be converted in the destination. If the destination image is null, a BufferedImage will be created with an appropriate ColorModel. An IllegalArgumentException might be thrown if the number of arrays in the LookupTable does not meet the restrictions stated in the class comment above, or if the source image has an IndexColorModel.
    
    Specified by:
    
    filter in interface BufferedImageOp
    
    Parameters:
    src - the BufferedImage to be filtered
    dst - the BufferedImage in which to store the results of the filter operation
    
    Returns:
    the filtered BufferedImage.
    
    Throws:
    
    IllegalArgumentException - if the number of arrays in the LookupTable does not meet the restrictions described in the class comments, or if the source image has an IndexColorModel.
  - filter
```
public final WritableRaster filter(Raster src,
                    WritableRaster dst)
```
    Performs a lookup operation on a Raster. If the destination Raster is null, a new Raster will be created. The IllegalArgumentException might be thrown if the source Raster and the destination Raster do not have the same number of bands or if the number of arrays in the LookupTable does not meet the restrictions stated in the class comment above.
    
    Specified by:
    
    filter in interface RasterOp
    
    Parameters:
    src - the source Raster to filter
    dst - the destination WritableRaster for the filtered src
    
    Returns:
    the filtered WritableRaster.
    
    Throws:
    
    IllegalArgumentException - if the source and destinations rasters do not have the same number of bands, or the number of arrays in the LookupTable does not meet the restrictions described in the class comments.
  - getBounds2D
```
public final Rectangle2D getBounds2D(BufferedImage src)
```
    Returns the bounding box of the filtered destination image. Since this is not a geometric operation, the bounding box does not change.
    
    Specified by:
    
    getBounds2D in interface BufferedImageOp
    
    Parameters:
    src - the BufferedImage to be filtered
    
    Returns:
    the bounds of the filtered definition image.
  - getBounds2D
```
public final Rectangle2D getBounds2D(Raster src)
```
    Returns the bounding box of the filtered destination Raster. Since this is not a geometric operation, the bounding box does not change.
    
    Specified by:
    
    getBounds2D in interface RasterOp
    
    Parameters:
    src - the Raster to be filtered
    
    Returns:
    the bounds of the filtered definition Raster.
  - createCompatibleDestImage
```
public BufferedImage createCompatibleDestImage(BufferedImage src,
                                      ColorModel destCM)
```
    Creates a zeroed destination image with the correct size and number of bands. If destCM is null, an appropriate ColorModel will be used.
    
    Specified by:
    
    createCompatibleDestImage in interface BufferedImageOp
    
    Parameters:
    src - Source image for the filter operation.
    destCM - the destination's ColorModel, which can be null.
    
    Returns:
    a filtered destination BufferedImage.
  - createCompatibleDestRaster
```
public WritableRaster createCompatibleDestRaster(Raster src)
```
    Creates a zeroed-destination Raster with the correct size and number of bands, given this source.
    
    Specified by:
    
    createCompatibleDestRaster in interface RasterOp
    
    Parameters:
    src - the Raster to be transformed
    
    Returns:
    the zeroed-destination Raster.
  - getPoint2D
```
public final Point2D getPoint2D(Point2D srcPt,
                 Point2D dstPt)
```
    Returns the location of the destination point given a point in the source. If dstPt is not null, it will be used to hold the return value. Since this is not a geometric operation, the srcPt will equal the dstPt.
    
    Specified by:
    
    getPoint2D in interface BufferedImageOp
    
    Specified by:
    
    getPoint2D in interface RasterOp
    
    Parameters:
    srcPt - a Point2D that represents a point in the source image
    dstPt - a Point2Dthat represents the location in the destination
    
    Returns:
    the Point2D in the destination that corresponds to the specified point in the source.
  - getRenderingHints
```
public final RenderingHints getRenderingHints()
```
    Returns the rendering hints for this op.
    
    Specified by:
    
    getRenderingHints in interface BufferedImageOp
    
    Specified by:
    
    getRenderingHints in interface RasterOp
    
    Returns:
    the RenderingHints object associated with this op.

Submit a bug or feature
For further API reference and developer documentation, see Java SE Documentation. That documentation contains more detailed, developer-targeted descriptions, with conceptual overviews, definitions of terms, workarounds, and working code examples.
Copyright © 1993, 2013, Oracle and/or its affiliates. All rights reserved.

Class LookupOp

Constructor Summary

Method Summary

Methods inherited from class java.lang.Object

Constructor Detail

LookupOp

Method Detail

getTable

filter

filter

getBounds2D

getBounds2D

createCompatibleDestImage

createCompatibleDestRaster

getPoint2D

getRenderingHints